
In the Holosun 507C vs 510C matchup, the deciding question is what you’re mounting it on. The 507C is a roughly 1.5 oz open reflex sight with an RMR footprint, built to mount directly to an optic-ready pistol slide. The 510C is a 4.94 oz open reflex sight with its own quick-detach Picatinny mount and a much larger 0.91 x 1.26 in. window, made for carbines, PCCs, and shotguns.
Buy the 507C if it’s going on a handgun. Buy the 510C if it’s going on a rail and you want a big window that clamps on and comes off with a lever. Both share Holosun’s Multi-Reticle System, Solar Failsafe, and Shake Awake.
| Spec | Holosun 507C | Holosun 510C |
|---|---|---|
| Optic type | Open pistol reflex sight | Open reflex sight for carbines, PCCs, and shotguns |
| Mounting | RMR footprint (no rail mount included) | Integrated quick-detach Picatinny mount |
| Dot height | Depends on the slide or mount | 1.41 in. (per Holosun) |
| Reticle | 2 MOA dot, 32 MOA circle, or both | 2 MOA dot, 65 MOA circle, or both |
| Reticle colors | Red or green; X3 also in gold | Red or green |
| Window | 0.91 x 0.63 in. (X2); 0.91 x 0.67 in. (X3) | 0.91 x 1.26 in. |
| Dimensions | 1.78 x 1.15 x 1.15 in. (X2); 1.78 x 1.31 x 1.1 in. (X3) | 3.3 x 1.68 x 1.78 in. |
| Weight | 1.5 oz (X2); 1.55 oz (X3) | 4.94 oz |
| Battery | CR1632, side tray | CR2032, side tray |
| Brightness settings | 10 daylight and 2 night vision (X2); 8 daylight and 4 night vision (X3) | 10 daylight and 2 night vision |
| Adjustment per click | 1 MOA | 0.5 MOA |
| Housing | 7075-T6 aluminum | Aluminum and titanium, titanium protective hood |
| Solar Failsafe and Shake Awake | Yes | Yes |
| Submersion rating | IP67 | IP67 |
Holosun 507C vs 510C: Mounting Is the Real Difference
The 507C uses the industry-standard RMR footprint, which lets it mount directly to a wide range of optic-ready pistol slides. Holosun doesn’t list a rail mount in the 507C box, so running one on a rifle, PCC, or shotgun takes a separate RMR-footprint plate, riser, or offset mount.
The 510C works the other way around. Its quick-detach Picatinny mount is built in, and it has no slide footprint, so it isn’t a pistol slide optic. Holosun lists a 1.41 in. dot height on that mount for co-witnessing with iron sights. If you aren’t sure which cut your pistol has, our Holosun optic footprints guide explains RMR, K, and 509T.
Window Size and Reticle: 32 MOA vs 65 MOA Circle
The window is where the 510C pulls ahead. Its 0.91 x 1.26 in. window has about twice the glass area of the 507C X2’s 0.91 x 0.63 in. window, and the 507C X3 only grows that to 0.91 x 0.67 in. Behind a rifle stock, that extra glass makes the dot easier to find when your cheek weld isn’t perfect.
On both optics, you can choose a 2 MOA dot, a circle, or the circle and dot together. The 507C’s circle is 32 MOA, and the 510C’s is 65 MOA. The larger circle is fast to pick up at close range on a shotgun or PCC, while the 2 MOA dot handles precise shots on either optic. Both come in red or green, and the 507C X3 gold dot adds a third color option.
Size, Weight, and Build
The 507C X2 weighs 1.5 oz and measures 1.78 x 1.15 x 1.15 in. The X3 weighs 1.55 oz and measures 1.78 x 1.31 x 1.1 in. That small size is what makes the 507C practical on a slide and in a holster. Comparing the 510C with the X3 instead of the X2 doesn’t change the answer; the X3 is still a pistol-size RMR optic.
The 510C weighs 4.94 oz and measures 3.3 x 1.68 x 1.78 in., which is far too big for a slide but reasonable for a reflex sight that needs no separate mount. The 507C uses a 7075-T6 aluminum housing. The 510C combines aluminum and titanium, adds a titanium protective hood, and comes in black or flat dark earth. Both carry an IP67 submersion rating.
Battery, Power, and Adjustments
Both optics load the battery from a side tray, so you can change it without removing the optic, which helps preserve zero. The 507C uses a CR1632. The 510C uses a larger CR2032 and is rated for up to 50,000 hours at setting 6.
Shake Awake powers the reticle down when the gun sits still and turns it back on when it moves, and Solar Failsafe adds a second power source in changing light. Both also have manual brightness, memory, and lockout mode. The 510C and the 507C X2 each have 10 daylight and 2 night-vision settings; the 507C X3 has 8 daylight and 4 night-vision settings. The 507C adjusts 1 MOA per click, while the 510C’s 0.5 MOA clicks make small zero corrections easier at rifle distances.
507C vs 510C on a PCC, AR-15, or Shotgun
Holosun builds the 510C for carbines, PCCs, and shotguns, and on those guns it’s the simpler choice: clamp it to the rail, zero it, and you’re set. If you want magnification later, the 510C is also sold with Holosun’s HM3X 3x flip-to-side magnifier as the 510C red dot and HM3X combo. Our HM3X vs HM3XT comparison covers the magnifier on its own.
A 507C can still make sense on a long gun. Some shooters want the same optic on their pistol and PCC, and the 507C’s small size works on an offset mount as a close-range backup beside a magnified scope. If you’re shopping rifle dots more broadly, see our 510C vs AEMS vs ARO comparison.
Which Should You Buy?
Neither optic is better overall; they’re built for different guns. Here’s how to choose:
- Choose the 507C for an optic-ready pistol with an RMR cut, whether it’s a carry, duty, or competition gun. The 507C X2 red dot and 507C X3 green dot are both good starting points; the X3 has the slightly larger window.
- Choose the 510C for an AR-15, PCC, or shotgun where you want a big window, a 65 MOA circle, and a mount that’s already attached. The 510C red dot and 510C green dot are the standard black versions.
- Choose a 510C HM3X combo if you want to add 3x magnification for longer shots. Our 510C guide compares the colors, the FDE finish, and the combos.
- Running a pistol and a carbine? A 507C on the handgun and a 510C on the long gun give you the same dot, circle, and circle-dot choices, with a bigger circle on the long gun.
Shop the Holosun 507C and 510C
Browse the collections to compare colors and finishes, or see the rest of our Holosun pistol red dots and the full Holosun lineup.
- Holosun 507C sights (X2 and X3 in red, green, and gold)
- Holosun 510C sights (black and FDE, red and green, plus HM3X combos)
- Holosun 507C X3 red dot sight
- Holosun 510C FDE green dot sight
- Holosun 510C green dot and HM3X 3x magnifier combo
Related Comparisons
FAQ
The 507C is a small RMR-footprint pistol optic that mounts directly to optic-ready slides. The 510C is a larger open reflex sight with a built-in QD Picatinny mount, a 0.91 x 1.26 in. window, and a 65 MOA circle, made for carbines, PCCs, and shotguns.
Neither is better across the board. The 507C is the right choice for a pistol, and the 510C is the better choice for a rifle, PCC, or shotgun because of its larger window and integrated rail mount.
Yes, but you need a separate RMR-footprint plate, riser, or offset mount, since the 507C doesn’t include a rail mount. You’ll also have a much smaller window than the 510C offers.
No. The 510C has an integrated Picatinny mount instead of a slide footprint, and at 4.94 oz it is built for long guns. For a pistol, look at the 507C or our other Holosun pistol red dots.
Yes. The 510C’s window is 0.91 x 1.26 in., compared with 0.91 x 0.63 in. on the 507C X2 and 0.91 x 0.67 in. on the 507C X3, so it has roughly twice the glass area.
No. The 507C uses a CR1632, and the 510C uses a CR2032. Both load from a side tray, so you can change the battery without removing the optic.

Leave a Reply