
In the Holosun HM3X vs HM3XT matchup, the glass is the same and the housing is the difference. Both are fixed 3x flip-to-side magnifiers with matching optical specs, but the HM3X uses an aluminum housing, while the HM3XT uses Grade 5 titanium in a shorter, heavier body.
Buy the HM3X if you want the lighter magnifier or want it bundled with a red dot. Buy the HM3XT if you want titanium and a shorter body and don’t mind the added weight. If size and weight matter most, the HM3X Micro is the most compact and lightest of the three.
| Spec | Holosun HM3X | Holosun HM3XT | Holosun HM3X Micro |
|---|---|---|---|
| Housing | Aluminum, MAO finish | Grade 5 titanium | 7075-T6 aluminum |
| Body dimensions | 4 x 1.7 x 2.5 in. | 3.2 x 1.8 x 2.5 in. | 2.76 x 2.44 x 1.81 in. |
| Weight | 9.8 oz | 11.6 oz | 8.47 oz |
| Magnification | 3x | 3x | 3x |
| Eye relief | 70mm | 70mm | 67mm |
| Exit pupil | 7.6mm | 7.6mm | 7.1mm |
| Field of view | 7 degrees | 7 degrees | 7 degrees |
| Diopter adjustment | ±3D | ±3D | ±3D |
| Transmittance | 0.75 | 0.75 | 0.75 |
| Alignment adjustment | 0.5 MOA per click, ±50 MOA | 0.5 MOA per click, ±50 MOA | Not listed |
| Mount | Flip-to-side QD | Flip-to-side QD | Flip-to-side QD |
| Co-witness heights | Absolute and lower 1/3 (spacer included) | Absolute and lower 1/3 (spacer included) | Absolute and lower 1/3 (spacer included) |
| Waterproof / vibration | IP67 / 1000G | IP67 / 1000G | IP67 / 1000G |
Holosun HM3X vs HM3XT Differences: Housing, Length, and Weight
Three things separate these magnifiers: housing material, length, and weight. The HM3X has an aluminum housing with an MAO finish. The HM3XT has a Grade 5 titanium housing, which Holosun describes as a premium 3x magnifier.
Titanium does not make it lighter. The HM3XT weighs 11.6 oz, against 9.8 oz for the HM3X, so the titanium model carries 1.8 oz more. What you get in exchange is a shorter body. Holosun lists the HM3XT 0.8 in. shorter than the HM3X, which helps on a short upper receiver or a crowded top rail.
Don’t expect the titanium housing to earn a higher durability rating on paper. Both models are rated IP67 waterproof and 1000G vibration resistant, and both have nitrogen-purged internals to resist fogging. Choosing the HM3XT is a decision about material and size; the listed ratings are identical.
What Stays the Same: Glass, Eye Relief, and Adjustments
Behind the housing, the two magnifiers share one optical spec sheet. Both use optical glass with fixed 3x magnification, a 7.6mm exit pupil, a 7-degree field of view, 70mm of eye relief, and a ±3 diopter adjustment, and Holosun lists 0.75 transmittance for both. On paper, there is no difference in magnification, field of view, or how far back your eye can sit.
Each also has windage and elevation alignment adjustments (0.5 MOA per click, with ±50 MOA of travel) for centering the magnified image over your red dot, plus an ambidextrous flip-to-side quick-detach mount. If image quality is your main concern, the spec sheets do not favor either model.
HM3X Micro vs HM3XT: The Compact Aluminum Option
If the short body is what draws you to the HM3XT, look at the HM3X Micro too. Holosun lists it as new for 2026, and it is the most compact of the three. At 8.47 oz, it is also the lightest: 3.13 oz less than the HM3XT and 1.33 oz less than the HM3X. Its housing is 7075-T6 aluminum, and it keeps the same 3x magnification, 7-degree field of view, and ±3 diopter adjustment, along with the same waterproof and vibration ratings.
The trade-offs are small but real. The Micro has 67mm of eye relief and a 7.1mm exit pupil, against 70mm and 7.6mm for the HM3X and HM3XT. It also lacks the titanium housing, which only the HM3XT offers.
Mounting and Pairing With a Red Dot
All three magnifiers mount to a Picatinny rail with a flip-to-side quick-detach mount, and each includes a lower 1/3 spacer so you can match a red dot at absolute or lower 1/3 co-witness height. Holosun lists the center heights of the HM3XT and HM3X Micro as 1.41 in. and 1.63 in., so confirm your red dot sits at one of those heights before you buy.
The easiest way to get a matched setup is a combo, and every magnifier combo in our Holosun magnifier collection pairs a red dot with the aluminum HM3X. Choose from the 510C red dot with HM3X, the 510C green dot with HM3X, the ARO Core 2 MOA with HM3X, and the ARO EVO SPR with HM3X. The 510C is an open reflex sight with a 2 MOA dot and 65 MOA circle, Solar Failsafe, and Shake Awake. The ARO Core is a simple 2 MOA dot with a 22mm window, and the ARO EVO adds a 26mm window and an SPR holdover reticle. Our Holosun 510C guide covers the red and green combos, and ARO Core vs ARO EVO compares those two optics.
Which Should You Buy?
- Choose the HM3X if you want the lighter of the two or want it bundled with a 510C or ARO. For most rifles, carbines, and PCCs, it is the sensible default.
- Choose the HM3XT if you want a Grade 5 titanium housing and a shorter body, and the extra weight does not bother you.
- Choose the HM3X Micro if size and weight come first and you can accept slightly less eye relief.
If you don’t own a rifle red dot yet, pick the optic first. Our 510C vs AEMS vs ARO comparison walks through the best Holosun options for an AR-15.
Shop Holosun 3x Magnifiers
We carry the HM3X, HM3XT, and HM3X Micro on their own, plus four red dot and HM3X combos. Browse the full Holosun magnifiers and magnifier combos collection, or see everything we stock from Holosun.
- Holosun HM3X 3x Magnifier with Flip-to-Side QD Mount
- Holosun HM3XT Titanium 3x Magnifier with Flip-to-Side QD Mount
- Holosun HM3X Micro 3x Magnifier with Flip-to-Side QD Mount
- Holosun HM6X 6x Magnifier, if you want more reach than 3x
Related Comparisons
FAQ
The housing. The HM3X is aluminum and weighs 9.8 oz, while the HM3XT is Grade 5 titanium, weighs 11.6 oz, and has a shorter body. Their optical specs, including 3x magnification, 70mm eye relief, and a 7-degree field of view, are the same.
No. Holosun lists the titanium HM3XT at 11.6 oz and the aluminum HM3X at 9.8 oz. The HM3XT is shorter, not lighter.
For most shooters, the HM3X is the better buy because it is lighter, has the same optical specs, and comes in red dot combos. The HM3XT makes sense if you want a titanium housing and a shorter magnifier.
Get the HM3X Micro if you want the most compact and lightest option, at 8.47 oz, and can accept 67mm of eye relief. Get the HM3XT if you want a titanium housing and 70mm of eye relief.
Yes. Both list 70mm of eye relief, a 7-degree field of view, and a 7.6mm exit pupil.
Both use a flip-to-side QD Picatinny mount and include a spacer for red dots at absolute or lower 1/3 co-witness height. Holosun lists a 1.41 in. center height for the HM3XT and 1.63 in. for the HM3X Micro.

Leave a Reply