Home » Blog » Optics » EOTECH » EOTECH Vudu 5-25 Review: MD3, MD4, H59, and Tremor5 Reticles Compared

EOTECH Vudu 5-25 Review: MD3, MD4, H59, and Tremor5 Reticles Compared

EOTECH Vudu 5-25 review

This EOTECH Vudu 5-25 review starts with the verdict: the Vudu 5-25×50 is worth a close look if you want a first focal plane (FFP) scope that reaches 25x in a body only 11.2 inches long. Its locking elevation turret has a zero stop, which suits shooters who dial for distance, and the scope is meant for precision shooting, long-range work, and hunting.

Every version shares that scope body, so the real decision is the reticle. The MD4 is the MOA choice, while the MD3, Horus H59, and Horus Tremor5 are MRAD. Each Horus reticle is a grid that lets you hold for elevation and wind rather than dial for every shot.

SpecificationEOTECH Vudu 5-25×50 FFP
Magnification and focal plane5-25x, first focal plane
Objective and tube50 mm objective, 34 mm tube
Length and weight11.2 in; 29.5 oz
ReticlesMD4 MOA; MD3, Horus H59, Horus Tremor5, and Horus Tremor3 MRAD
Elevation turretPush/pull locking, with EZ Chek Zero Stop
IlluminationIlluminated reticle, CR2032 battery
Eye relief2.96-3.71 in at 5x; 3.27-3.63 in at 25x
Field of view at 100 yd23.3 ft at 5x; 4.7 ft at 25x
GlassXC High-Density glass, anti-reflective lens coatings
BuildAircraft-grade aluminum; fog, water, and shock resistant
FinishBlack for every reticle; tan for the MD4 and Tremor5

This review is based on these listed specifications and each reticle’s description, not on a hands-on tracking or low-light test.

MOA or MRAD: Choosing a Vudu 5-25 Reticle

Pick the unit before the pattern. It decides how you read holds and how you call or take corrections, so match it to the ballistic data and habits you already have.

The MD4 is a versatile medium- to long-range reticle for shooters who prefer MOA-based subtensions. On the MD4 version, clicks are 0.25 MOA, so holds and dialed corrections use the same unit. If your ballistic app, data book, and other scopes already speak MOA, start here.

Choose one of the MRAD reticles (MD3, Horus H59, Horus Tremor5, or Horus Tremor3) if you already think in mils or your shooting partner calls wind that way. On the MD3 version, clicks are 0.1 MRAD, so turret and reticle share a unit there too.

Because the 5-25 is FFP, each reticle keeps its subtensions consistent from 5x to 25x. Holds and ranging marks stay valid at any magnification, which matters most when you hold off a grid instead of dialing. The trade-off is visual: the reticle looks smaller at 5x and larger at 25x, so judge it at both ends of the range.

MD3 and MD4 vs Horus H59 and Tremor5

With the unit settled, the next choice is between the MD reticles and the Horus grids. The MD4 MOA and MD3 MRAD give you references for ranging, holds, and dialed corrections at medium to long range, and the MD3 uses a mil-dot-style pattern. If you plan to dial elevation and hold only for quick corrections, either one covers it.

The Horus reticles are built around holds. The Horus H59 is a grid-style system for medium- to long-range work, with elevation and wind references that spare you constant dialing between shots. The Horus Tremor5 uses a grid that helps you place the target on horizontal and vertical reference lines to correct for elevation and windage. It supports fast engagement at lower to mid power as well as precise work at higher magnification.

EOTECH also makes the 5-25 with a Horus Tremor3 MRAD reticle in black. Its detailed Horus grid is built for advanced long-range holds, wind correction, and fast follow-up shots.

ReticleUnitBuilt forFinishes
MD4MOAVersatile medium- to long-range use with MOA-based subtensionsBlack, tan
MD3MRADMil-dot-style ranging, holds, and correctionsBlack
Horus H59MRADGrid-style elevation and wind holds without constant dialingBlack
Horus Tremor5MRADGrid holds for elevation and windage; fast at lower to mid power, precise at higher powerBlack, tan
Horus Tremor3MRADAdvanced long-range holds, wind correction, and fast follow-up shotsBlack

Tremor5 vs MD4

These two are the only 5-25 reticles we offer in tan as well as black, and they sit at opposite ends of the choice. The MD4 keeps holds and clicks in MOA and suits a shooter who dials for distance. The Tremor5 works in mils and suits a shooter who would rather hold: its Horus grid covers elevation and windage, and it stays quick at lower to mid power.

Turrets, Zero Stop, and Illumination

Every version has the same elevation turret: a push/pull locking design with EOTECH’s EZ Chek Zero Stop. A locking turret is meant to stay where you set it until you unlock it, so a bump in a rifle case or against a barricade should not change your dialed elevation. The zero stop lets you dial back to your zero after a long shot without counting revolutions.

The reticle illumination runs on a CR2032 battery. It is a common coin cell, so a spare takes up almost no room in a range bag.

Mounting, Size, and Build

The 5-25 has a 34 mm main tube, so buy rings or a scope mount in that size. Choose a height that gives the 50 mm objective clearance over your barrel and rail. Eye relief is 2.96-3.71 inches at 5x and 3.27-3.63 inches at 25x, so check your head position at both settings before you tighten everything down.

The short body also leaves rail space ahead of the scope for a clip-on night-vision or thermal unit. The catch is weight: at 29.5 oz, the scope adds noticeable heft to a rifle you plan to carry.

The housing is aircraft-grade aluminum and is fog, water, and shock resistant. For the optics, EOTECH pairs XC High-Density glass with anti-reflective lens coatings to help maintain clarity, contrast, and color accuracy.

Vudu 5-25 vs Vudu 4-12

The Vudu 4-12×36 is the compact alternative. It is 4.1 inches shorter and 12.6 oz lighter and also has an FFP reticle. It starts lower, at 4x, but tops out at 12x with a 36 mm objective.

DifferenceEOTECH Vudu 4-12×36Vudu 5-25×50
Magnification and objective4-12x, 36 mm5-25x, 50 mm
Length and weight7.1 in; 16.9 oz11.2 in; 29.5 oz
Low-power field of view at 100 yd28.5 ft at 4x23.3 ft at 5x
Reticle unitsMRAD (MD5 or MR5)MOA (MD4) or MRAD
TurretsCapped, 0.1 MRAD clicksPush/pull locking elevation, zero stop

The controls differ as well. The 4-12 uses capped turrets with 0.1 MRAD clicks and a rotary illumination dial with 10 brightness settings, and both of its reticles, the MD5 and MR5, are MRAD. If you dial for each distance, the 5-25’s locking elevation turret and zero stop are the better match, and the 5-25 is also the one to choose for an MOA reticle.

Choose the 4-12 if the rifle has to stay short and light; choose the 5-25 when magnification and a dialing turret matter more than weight. Our EOTECH Vudu 4-12 review covers its reticles and EFLX packages, and the EOTECH Vudu scope guide compares every Vudu line we carry.

EOTECH Vudu 5-25 Review Verdict: Which Should You Buy?

The Vudu 5-25×50 earns a place on your shortlist if you want a long-range FFP scope that stays short and comes in both MOA and MRAD. Look elsewhere if you need 1x for close work, since it starts at 5x, or if its weight is too much for a rifle you carry far. Then pick the reticle:

  • MD4 MOA: you work in MOA and want your holds and clicks in the same unit.
  • MD3 MRAD: you work in mils and want mil-dot-style references while you dial.
  • Horus H59 MRAD: you want to hold elevation and wind off a grid instead of dialing between shots.
  • Horus Tremor5 MRAD: you want a Horus grid that stays quick at lower to mid power, plus a choice of black or tan.

If you are still choosing between EOTECH product lines rather than reticles, our EOTECH models guide covers the whole lineup.

Shop EOTECH Vudu 5-25 Scopes

Pick your reticle and finish, then compare every version side by side in our EOTECH Vudu 5-25 scopes collection. For other magnification ranges, browse all EOTECH Vudu scopes, or see the rest of our EOTECH lineup.

Related Comparisons

FAQ

Who is the EOTECH Vudu 5-25 for?

It suits shooters who want a first focal plane scope that reaches 25x in an 11.2-inch body, with a zero stop for dialing and a choice of MOA or MRAD reticles. It starts at 5x and weighs 29.5 oz, so it is not a close-range or lightweight optic.

Is the EOTECH Vudu 5-25×50 first focal plane?

Yes. Every version is a first focal plane (FFP) scope, so the reticle’s subtensions stay consistent from 5x to 25x and your holds work at any magnification.

Which reticles does the EOTECH Vudu 5-25 come with?

We list it with five reticles: the MD4 in MOA, and the MD3, Horus H59, Horus Tremor5, and Horus Tremor3 in MRAD. The MD4 and Tremor5 come in black or tan, and the other three come in black.

Tremor5 vs MD4: which Vudu 5-25 reticle should I choose?

Choose the MD4 if you work in MOA; its 0.25 MOA clicks keep holds and corrections in the same unit. Choose the Horus Tremor5 if you work in mils and want a grid for holding elevation and windage.

Is there a Vudu 5-25 with the Horus Tremor3 reticle?

Yes. EOTECH makes a black Vudu 5-25×50 FFP with the Horus Tremor3 MRAD reticle, built for advanced long-range holds, wind correction, and fast follow-up shots. The Horus H59 and Tremor5 are the other Horus grid options.

What are the EOTECH Vudu 5-25×50 specs?

It measures 11.2 inches, weighs 29.5 oz, and uses a 34 mm main tube with a 50 mm objective. Eye relief is 2.96-3.71 inches at 5x and 3.27-3.63 inches at 25x, and at 100 yards the field of view spans 23.3 feet at 5x and 4.7 feet at 25x.

What size rings does the EOTECH Vudu 5-25x50mm need?

The Vudu 5-25×50 has a 34 mm main tube, so choose rings or a one-piece mount in that diameter. Make sure the height you pick also clears the 50 mm objective.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *