Home » Blog » Optics » EOTECH » EOTECH Vudu 1-8 Review: HC3 Reticle, SFP Design, and Who It Suits

EOTECH Vudu 1-8 Review: HC3 Reticle, SFP Design, and Who It Suits

EOTECH Vudu 1-8 review

Our EOTECH Vudu 1-8 review comes down to one trade-off. The Vudu 1-8×24 is a low-power variable optic (LPVO) with a second-focal-plane (SFP) design, so its duplex-style HC3 MOA reticle looks the same size at 1x as it does at 8x. That keeps the reticle bold and easy to read up close, but its holdover marks match their listed values at only one magnification.

Buy it if you want a simple reticle and 8x of reach in one optic for a carbine, hunting rifle, or general-purpose build. If you want holds that stay true at every power, or you work in MRAD, the first-focal-plane (FFP) Vudu 1-6 and 1-10 are the better fit.

SpecificationVudu 1-8×24 SFP
Magnification1-8x
Focal planeSecond (SFP)
ReticleHC3 MOA or HC3 Green MOA, duplex-style with ballistic holdover points
IlluminationPush-button, powered by a CR2032 battery
Objective diameter24 mm
Tube diameter30 mm
Length10.9 in
Weight20.8 oz
Eye relief3.46-4.09 in at 1x; 3.54-3.90 in at 8x
Field of view at 100 yd105.8 ft at 1x; 13.2 ft at 8x
FinishBlack

Figures come from EOTECH and our product pages. This review is based on those published specs, not a hands-on range test.

Vudu 1-8 Reticle: HC3 MOA vs HC3 Green MOA

The HC3 is a duplex-style MOA reticle. As on a classic duplex, heavy outer posts lead your eye to a finer center, and holdover marks sit below it. EOTECH lists those marks at 2, 5, 8.5, and 12.5 MOA when the scope is on 8x, and it describes the 0.5 MOA illuminated center dot as daylight visible.

Because the holds are listed in MOA rather than yards, you match them to your own ammunition. Zero the rifle, set the scope to 8x, and shoot at the distances you care about to see which mark puts rounds on target at each one. It takes a range session, but the holds then fit your rifle instead of an assumed load.

Next to the busier reticles in the Vudu line, the HC3 keeps things simple. The 1-10’s SR5 and LE5 are MRAD Christmas tree reticles with more wind and elevation references; the HC3 trades that detail for a cleaner view.

The HC3 comes in two versions on the same scope, both with push-button illumination. The HC3 MOA is the standard version, and the HC3 Green MOA is for shooters who find a green aiming point easier to pick up. Which color works better is personal, so look through both if you can.

Second Focal Plane: What Changes between 1x and 8x

In a second-focal-plane scope, the reticle sits behind the zoom assembly, so it stays the same size to your eye while the target grows. On the Vudu 1-8, that has two practical effects.

First, the HC3 stays bold at 1x. The posts and the illuminated dot do not shrink when you turn the power down, which helps on fast, close shots. FFP LPVOs work the other way. Their reticles are smallest at 1x, so EOTECH gives the Vudu 1-6 an illuminated Speed Ring and the 1-10 an illuminated center section to keep them fast at low power.

Second, the holds work as listed only at 8x, where the reticle also covers the least of the target. Use 8x when you hold for drop. At lower power, each mark spans more of the target: at 4x, every mark is worth twice its 8x value, so the 5 MOA mark covers 10 MOA.

If you were looking for a Vudu 1-8 FFP, the 1-8×24 models we carry are SFP. Our first-focal-plane Vudu LPVOs are the 1-6×24 and 1-10×28, compared below.

Mounting the Vudu 1-8: 30 mm Tube and Eye Relief

The Vudu 1-8 has a 30 mm tube, so it takes 30 mm rings or a 30 mm one-piece mount. The scope is 10.9 inches long and weighs 20.8 oz before you add the mount.

Eye relief decides where the scope sits. The listed range is 3.46 to 4.09 inches at 1x and 3.54 to 3.90 inches at 8x. The window is narrower at 8x, so set the scope’s position at that power first, keeping your head where it naturally rests on the stock, then confirm the view is clear edge to edge at 1x.

On an AR-style carbine, a one-piece cantilever mount is a common way to move the scope far enough forward. On a bolt-action rifle, a pair of rings is the usual choice. Either way, torque the screws to the mount maker’s specification.

Vudu 1-8 vs 1-6 vs 1-10

If you are choosing an EOTECH LPVO, the 1-8 sits between the Vudu 1-6 and 1-10 on reach, but the bigger difference is the focal plane: of these three, it is the only SFP scope.

SpecificationVudu 1-6×24 FFPVudu 1-8×24 SFPVudu 1-10×28 FFP
Focal planeFirstSecondFirst
Tube diameter30 mm30 mm34 mm
Objective diameter24 mm24 mm28 mm
Length10.63 in10.9 in10.63 in
Weight20.1 oz20.8 oz21.3 oz
Field of view at 1x (100 yd)102.4 ft105.8 ft116.6 ft
Field of view at top power (100 yd)16.7 ft at 6x13.2 ft at 8x11.7 ft at 10x
Eye relief at 1x3.27-3.94 in3.46-4.09 in3.27-3.90 in
Reticles we carrySR1 MRAD, SR2 7.62 BDC, SR3 5.56 BDCHC3 MOA, HC3 Green MOASR4 MOA, SR5 MRAD, LE5 MRAD
  • Vudu 1-6×24 FFP: the lightest of the three, with the widest view at its top power. Its SR reticles come in MRAD and in BDC (bullet drop compensator) versions for 5.56 and 7.62. Choose the EOTECH Vudu 1-6 if you want first-focal-plane holds and 6x is enough; our EOTECH Vudu 1-6 review compares the SR1, SR2, and SR3.
  • Vudu 1-10×28 FFP: 10x on top and the widest 1x field of view, but its 34 mm tube needs a matching mount. If you like a duplex-style MOA reticle and want it in the first focal plane, the Vudu 1-10×28 FFP SR4 MOA is the closest match to the HC3. Browse the EOTECH Vudu 1-10 line, or read our EOTECH Vudu 1-10 review for the SR4, SR5, and LE5.
  • Vudu 1-8×24 SFP: more reach than the 1-6 with the same 30 mm tube, plus the longest listed eye relief at 1x of the three.

For the rest of the line, our EOTECH Vudu scope guide compares the other models and reticles.

LPVO vs EOTECH with a Magnifier

Plenty of shoppers weigh an LPVO like the Vudu 1-8 against a holographic sight, such as an EOTECH EXPS3, with a magnifier mounted behind it. In its own comparison of that hybrid setup and the Vudu 1-6, EOTECH says the biggest difference between the two is magnification, and it calls unlimited eye relief one of the EXPS3’s key advantages.

  • Holographic sight and magnifier: a fast 1x sight plus one magnified view when the magnifier is in place. EOTECH suggests this setup for shooters who value holographic speed and only occasionally need magnification.
  • Vudu 1-8: every setting from 1x to 8x in one optic, with holdover marks for longer shots. The trade is that your eye has to stay within the scope’s eye relief.

If most of your shooting is close and fast, start with an EOTECH magnifier combo and use our EOTECH G33 vs G43 vs G45 guide to pick the magnifier. If you want to identify targets and hold for drop farther out, the Vudu 1-8 is the simpler single-optic answer.

EOTECH Vudu 1-8 Review: Which Should You Buy?

Between the two Vudu 1-8 versions, the listed specs differ only in reticle color, so pick the one you find easier to see. Choosing between models comes down to how you shoot:

  • Buy the Vudu 1-8 if you want a plain reticle that stays bold at 1x, 8x on top, and MOA holds you can match to your load.
  • Choose the Vudu 1-6 if you want first-focal-plane holds, MRAD, or a 5.56 or 7.62 BDC, and 6x is enough.
  • Choose the Vudu 1-10 if you want a first-focal-plane reticle, 10x, and the widest 1x field of view.
  • Choose a holographic sight and magnifier if most of your shooting is close and fast.

Shop the EOTECH Vudu 1-8

Pick the reticle color you prefer from the links below. If you are still comparing optics, our guide to EOTECH models covers the full lineup, from holographic sights to Vudu scopes.

Related Comparisons

FAQ

Is the EOTECH Vudu 1-8 first focal plane?

No. The Vudu 1-8×24 models we carry are second focal plane, so the HC3 reticle stays the same size at every magnification. Our first-focal-plane Vudu LPVOs are the 1-6×24 and 1-10×28.

What reticle does the EOTECH Vudu 1-8 use?

It uses the HC3, a duplex-style MOA reticle with ballistic holdover points. EOTECH lists a 0.5 MOA illuminated center dot and elevation hold marks at 2, 5, 8.5, and 12.5 MOA when the scope is on 8x. It comes in HC3 MOA and HC3 Green MOA versions.

What does SFP mean on the Vudu 1-8×24?

SFP stands for second focal plane. The reticle stays the same size while the image is magnified, so the HC3’s hold marks match their listed values only at 8x, where EOTECH specifies them.

Is an LPVO better than an EOTECH with a magnifier?

Neither is better for everyone. An LPVO like the Vudu 1-8 gives you every setting from 1x to 8x and holdover marks in one optic. A holographic sight such as the EXPS3, which EOTECH says has unlimited eye relief, gives you a fast 1x sight, and a magnifier behind it adds a magnified view when you need one.

Should I get the Vudu 1-8 or the Vudu 1-10?

Get the 1-8 if you want a reticle that stays the same size at every power and a 30 mm tube. Get the 1-10 if you want first-focal-plane holds, 10x, and a wider field of view at 1x (116.6 ft vs 105.8 ft at 100 yards); it uses a 34 mm tube.

What size mount does the Vudu 1-8×24 need?

It has a 30 mm tube, so it takes 30 mm rings or a 30 mm one-piece mount. Listed eye relief is 3.46 to 4.09 inches at 1x and 3.54 to 3.90 inches at 8x.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *