Home » Blog » Optics » EOTECH » EOTECH Vudu 1-6 Review: SR1, SR2, and SR3 Reticles Compared

EOTECH Vudu 1-6 Review: SR1, SR2, and SR3 Reticles Compared

EOTECH Vudu 1-6 review

The short answer from our EOTECH Vudu 1-6 review: it is a strong pick for a rifle that needs a fast 1x and holds you can use at any power up to 6x. The Vudu 1-6×24 is a first-focal-plane (FFP) low-power variable optic (LPVO) on a 30mm tube. The main decision is the Speed Ring reticle: the SR1 MRAD, the SR2 7.62 BDC, or the SR3 5.56 BDC, each offered in a standard or Green version.

The 1-6 suits ARs, bolt guns, and general-purpose carbines. Choose the SR3 for 5.56, the SR2 for .308, and the SR1 if you want mil-based holds that work with any load. If you prefer a reticle that stays the same size at every power, or you need more magnification, compare the Vudu X 1-6, Vudu 1-8, and Vudu 1-10 below.

SpecificationEOTECH Vudu 1-6×24
Magnification1-6x
Focal planeFirst focal plane (FFP)
Objective lens24mm
Tube diameter30mm
Length10.63 in
Weight20.1 oz
Eye relief3.27-3.94 in at 1x; 3.23-3.94 in at 6x
Field of view at 100 yd102.4 ft at 1x; 16.7 ft at 6x
ReticlesSR1 MRAD, SR2 7.62 BDC, SR3 5.56 BDC (standard or Green)
BatteryCR2032

This review is based on published specifications and reticle descriptions, not on range testing.

SR1 vs SR2 vs SR3: Choosing a Vudu 1-6 Reticle

All three are FFP Speed Ring reticles. The Speed Ring is your fast aiming reference at 1x, and the detail inside it becomes useful as you zoom in. The real choice is how you want to hold for distance: with drop marks built for one cartridge, as on the SR2 and SR3, or with mil-based marks, as on the SR1.

SR3 5.56 BDC: The AR-15 Match

The SR3’s drop references are built for .223 Remington / 5.56 NATO, which makes it the direct match for a 5.56 AR-15. Like any bullet drop compensator (BDC), it assumes typical ballistics for that cartridge. Your barrel length and ammunition decide where the bullet actually lands, so confirm each hold at distance before you rely on it. The SR3 5.56 BDC is the standard version, and we also carry the SR3 Green 5.56 BDC.

SR2 7.62 BDC: For .308 Rifles

The SR2 does the same job for .308 Win / 7.62mm, so it belongs on a .308 AR or bolt gun. Check its holds with your own load the same way. It comes as the SR2 7.62 BDC or the SR2 Green 7.62 BDC. If your rifle shoots a cartridge outside that class, the SR1 is the safer choice.

SR1 MRAD: Mil Holds for Any Cartridge

Instead of drop marks, the SR1 has a hashmarked MRAD crosshair inside the Speed Ring for ranging, holdovers, and wind calls. Mil hashmarks aren’t tied to one cartridge, so the SR1 works with any caliber as long as you know your drops in mils. It is the pick if you shoot several loads or use a ballistic app. Choose the SR1 MRAD or the SR1 Green MRAD.

How the FFP Reticle Works at 1x and 6x

In a first-focal-plane scope, the reticle grows and shrinks with the image. At 1x it is at its smallest, so the fine center detail is hard to use. That is by design: the Speed Ring does the work at low power. As you turn toward 6x, the crosshair or drop marks get large enough to read.

Because the reticle and the target scale together, each mark covers the same part of the target at 3x as it does at 6x. That means you can hold over at 4x without first turning to full power.

If you want a second-focal-plane (SFP) 1-6 instead, EOTECH makes the Vudu X 1-6×24, whose reticle keeps the same size as you zoom. It comes with a BD1 MOA ballistic-drop reticle or a DP1 MOA dual-purpose reticle, weighs 17.8 oz, measures 10.3 inches, and has a wider 110-foot field of view at 1x. The catch is the focal plane itself: SFP holdover marks are calibrated for one magnification, while the Vudu 1-6’s FFP holds work at any power.

Illumination: Standard or Green?

Every Vudu 1-6 has an illuminated reticle powered by a CR2032, so keep a spare battery in your range bag. The Green versions use high-visibility green illumination that helps the aiming reference stand out quickly at low power. Otherwise, they match the standard versions: same reticle layout, same holds, and same scope specs. If you can, look through both and choose the color your eye picks up faster.

Build and Mounting

The Vudu 1-6 is built on an aircraft-aluminum tube with XC high-density glass and anti-reflective coated lenses, and it resists fog, water, and shock. It takes 30mm rings or a one-piece 30mm mount. On an AR, a one-piece cantilever mount is the usual way to get an LPVO far enough forward for proper eye relief.

Eye relief barely changes between 1x and 6x, so set the scope’s fore-and-aft position at 6x with your normal cheek weld, then check for a full sight picture at 1x. Torque the mount to its maker’s spec and zero the rifle before you trust any hold.

Vudu 1-6 vs 1-8 vs 1-10: Which EOTECH LPVO?

SpecificationEOTECH Vudu 1-6EOTECH Vudu 1-8EOTECH Vudu 1-10
Magnification1-6x1-8x1-10x
Focal planeFirst (FFP)Second (SFP)First (FFP)
ReticlesSR1 MRAD, SR2 7.62 BDC, SR3 5.56 BDCHC3 MOASR4 MOA, SR5 MRAD, LE5 MRAD
Tube / objective30mm / 24mm30mm / 24mm34mm / 28mm
Length10.63 in10.9 in10.63 in
Weight20.1 oz20.8 oz21.3 oz
Field of view at 1x (100 yd)102.4 ft105.8 ft116.6 ft
Field of view at top power16.7 ft at 6x13.2 ft at 8x11.7 ft at 10x

The 1-6 is the lightest of the three and the only one offered with 5.56 and 7.62 BDC reticles. The 1-8 tops out at 8x and uses a second-focal-plane HC3 MOA reticle with ballistic holdover points. Because the scope is SFP, the reticle never changes size as you zoom, which keeps the sight picture simple at 1x. Our EOTECH Vudu 1-8 review covers it in detail.

The 1-10 is the same length and only 1.2 oz heavier, yet it reaches 10x and has the widest field of view at 1x of the three. It moves to a 34mm tube, though, so 30mm rings won’t fit it. Our EOTECH Vudu 1-10 review compares its SR4 and SR5 reticles.

If you don’t need a 1x setting, our guide to which EOTECH Vudu to buy covers the scopes that start above 1x.

EOTECH Vudu 1-6 Review: Who Should Buy It?

The Vudu 1-6 earns its spot with its reticle choices. The trade-off to know about is field of view at 1x: it is the narrowest of the Vudu LPVOs compared here, though only slightly narrower than the 1-8’s.

  • Buy it if you want a 1x-to-6x scope with BDC holds for 5.56 or .308, or MRAD holds for any load.
  • Look elsewhere if you prefer a second-focal-plane reticle. The Vudu X 1-6 and Vudu 1-8 are both SFP.
  • Also look elsewhere if you need more than 6x or the widest view at 1x. The Vudu 1-10 gives you both.

Shop the Vudu 1-6

Start with the reticle that matches your rifle, then choose the standard or Green version. For the rest of the lineup, browse all EOTECH optics or see our guide to EOTECH models.

Related Comparisons

FAQ

Is the EOTECH Vudu 1-6 FFP or SFP?

The Vudu 1-6×24 is first focal plane (FFP), so its reticle scales with the image and its holds work at any magnification. If you want a second-focal-plane 1-6, EOTECH also makes the Vudu X 1-6×24.

What is the difference between the SR1, SR2, and SR3 reticles?

All three are FFP Speed Ring reticles. The SR1 has a hashmarked MRAD crosshair for ranging, holdovers, and wind calls. The SR2 has ballistic drop references for .308 Win / 7.62mm, and the SR3 has them for .223 Remington / 5.56 NATO.

Which Vudu 1-6 reticle is best for an AR-15?

For a 5.56 AR-15, the SR3 5.56 BDC is the direct match. Choose the SR1 MRAD instead if you shoot several loads or work from drop data in mils.

What battery does the EOTECH Vudu 1-6 use?

It uses a CR2032 to power the reticle illumination in both the standard and Green versions.

What size rings does the Vudu 1-6×24 need?

It has a 30mm tube, the same size as the Vudu 1-8, so it takes 30mm rings or a one-piece 30mm mount.

How much does the EOTECH Vudu 1-6 weigh?

The Vudu 1-6×24 weighs 20.1 oz and is 10.63 inches long. That makes it a little lighter than the Vudu 1-8 (20.8 oz) and the Vudu 1-10 (21.3 oz).

Should I get an LPVO or an EOTECH with a magnifier?

Get an LPVO like the Vudu 1-6 if you want one optic that zooms from 1x to 6x with holdover marks in the reticle. Choose an EOTECH with a magnifier if you want a holographic sight as your main 1x optic and a separate magnifier for distance. Our EOTECH magnifier combo collection lists sights and magnifiers sold together.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *