
Tikka T1x vs CZ 457 is a close comparison, because both are bolt-action rimfires with adjustable triggers and more than one stock style. The Tikka T1x offers four finished models, a barreled action with the same footprint as the T3x, and an Ace Target chassis. CZ describes its 457 as a platform with user-swappable barrels and calibers. This review covers the T1x MTR, UPR, Ace Target, and Hunter, then compares the line with the CZ 457 and the Bergara BMR using each maker’s own descriptions. You can browse the rifles on our Tikka T1x page.
This is a design-and-features review. We have no range data, so we do not rate accuracy or reliability. We describe what the makers list and who each rifle suits. The sections follow the order most buyers ask about: the models first, then the CZ and Bergara comparisons, then the technical details.
The Short Answer: Four Tikka T1x Models
All four models are rimfire rifles in .22 LR or .17 HMR, with a single-stage trigger adjustable from 1 to 2 kg (2 to 4 lb). They differ mainly in the stock, so the table below sorts them that way.
| Model | Stock | Magazine | Suits |
|---|---|---|---|
| T1x MTR | Black synthetic, modular | 10-round | Target shooting and small-game hunting |
| T1x UPR | Fiberglass with carbon fiber bedding surfaces, adjustable cheek piece | 10-round | Shooters who want an adjustable fiberglass stock |
| T1x Ace Target | Black anodized aluminum chassis with rails | 10-round | Chassis-style target shooting |
| T1x Hunter | Oiled, checkered wood | Short flush magazine | Traditional field use |
What Every T1x Shares
Four features carry across the line. The barrel is cold hammer-forged and hand-crowned, and the MTR, Hunter, and Ace Target use a cross-over profile that Tikka designed to give heavy-barrel stability without much extra weight. The trigger is single-stage and adjusts through the magazine well. The bolt opens 45 degrees and has a removable handle, and a two-position safety blocks the trigger and the bolt handle, with indicators for the safety and firing pin status. The receiver has an integral dovetail and is drilled and tapped, and none of the rifles has iron sights.
Tikka T1x vs CZ 457: A Fair Comparison
This section uses CZ’s own descriptions of two models and stays with design. CZ makes the 457 in distinct builds. The 457 Hunter Veil is a hunting rifle with a 20-inch barrel, a threaded muzzle with a compensator, a polymer stock in a Veil camouflage pattern, and a fully adjustable trigger, and CZ says it has user-swappable barrels and calibers. The 457 Target is a competition rifle with a 26-inch match barrel, a two-stage trigger with fine adjustments, and an aluminum chassis built for ISSF competition.
The T1x answers with a different set of strengths. Its single-stage trigger adjusts through the magazine well, its barrel is cold hammer-forged and hand-crowned, and its action has the same footprint as the T3x, so it feels like the rest of Tikka’s lineup. The Ace Target shares a chassis design with the T3x Ace Target, and the MTR is offered in left-hand versions. Every T1x we list has a threaded barrel and a 10-round or short flush magazine.
Both rifles reward the same kind of shooter: someone who wants a rimfire that adjusts to them rather than one fixed setup. The difference is where each brand puts the adjustment. CZ puts it in a swappable barrel and a competition trigger, and Tikka puts it in stock choice and a trigger that you set through the magazine well.
Choose the CZ if swapping barrels or calibers on one receiver matters to you, or if you shoot ISSF-style competition. Choose the T1x if you want a Tikka that matches a centerfire T3x, or one of its four stock styles, including the Ace Target chassis.
T1x MTR vs UPR vs Ace Target vs Hunter
The MTR is the all-round model. MTR stands for Multi-Task Rimfire, and Tikka aims it at target shooting and small-game hunting. The black synthetic stock is modular, with a grip and forend you can replace, and the barrel uses a cross-over profile that Tikka designed to give heavy-barrel stability without much extra weight. One 10-round magazine is included. Try the .22 LR MTR or the .17 HMR MTR. Both calibers also come in left-hand versions, which are on our Tikka left-handed rifles page.
The T1x UPR keeps the same action and magazine but changes the stock. It has a Desert Sand fiberglass stock with carbon fiber bedding surfaces, a rough coating for grip, a vertical pistol grip, and an adjustable cheek piece. That makes the T1x UPR vs MTR decision mostly about the stock: choose the MTR for the modular synthetic stock, and the UPR if you want the adjustable cheek piece and the fiberglass feel. See the .22 LR UPR and the .17 HMR UPR.
The T1x Ace Target uses the same aluminum chassis as the T3x Ace Target, in black anodized finish. The rear stock adjusts for length of pull, cheek rest, and recoil pad, and the chassis has a 20 MOA Picatinny rail plus M-LOK and Arca-Swiss rails, with a 10-round magazine. Look at the .22 LR Ace Target or the .17 HMR Ace Target. If you already know the T3x Ace Target layout, the controls and adjustments will feel familiar.
The T1x Hunter is the traditional option, with a checkered, oiled wood stock in the T3x style. It uses a short flush magazine that holds 5 rounds in .22 LR, and its barrel is free-floating. See the .22 LR Hunter. A wood-stocked rimfire suits shooters who prefer traditional lines to a synthetic stock or a chassis, and it keeps the Tikka T3x look.
Left-Hand T1x Rifles
Left-handed shooters have a clear option in this line. Tikka makes the MTR in left-hand versions in both .22 LR and .17 HMR. The UPR, Ace Target, and Hunter are listed as right-hand rifles on our site, so the MTR is the model to look at if you shoot from the left. The full set of left-hand Tikka rifles, including centerfire models, is easier to scan on the left-handed page linked above.
Tikka T1x vs Bergara BMR
This paragraph relies on Bergara’s own page. Bergara describes the BMR as a micro version of its B-14 action, in .22 LR, .22 WMR, and .17 HMR, with 18-inch or 20-inch barrels that are threaded for a suppressor. It is magazine fed and comes with two magazines, one holding 5 rounds and one holding 10. The BMR adds .22 WMR, which the T1x does not offer in our listings. The T1x counters with its range of stocks, including the chassis and the wood-stocked Hunter, and with 16-inch and 20-inch threaded barrels.
Tikka T1x vs T3x
The T1x shares its action footprint with the Tikka T3x, and Tikka says the T1x barreled action fits T3x Lite and T3x UPR stocks. The Hunter stock is specific to the T1x action. The bolts differ: the T1x opens 45 degrees, and the T3x opens 70 degrees. If you want one rifle layout for both centerfire and rimfire practice, the T1x is the natural pair. Our guide to Tikka rifle models shows how the T1x fits with the T3x lines.
Tikka T1x .22 LR Accuracy and .22 LR vs .17 HMR
We cannot give you group sizes, and we do not rate accuracy for any rimfire here. What we can say comes from Tikka’s design: the barrel is cold hammer-forged and hand-crowned, the trigger is adjustable, and the barrel is free-floating on the wood-stocked and chassis models. The twist rate is 1:16.5 inches in .22 LR and 1:9 inches in .17 HMR on every configuration.
Because every T1x has the same trigger and bolt, switching between .22 LR and .17 HMR rifles feels familiar, which helps if you want one of each.
Pick the caliber first, then pick the stock. The MTR, UPR, and Ace Target come in both calibers.
Magazines and Scopes
The MTR, UPR, and Ace Target use 10-round magazines, and the Hunter uses a short flush magazine. Spares are on the Tikka T3x magazines page, which also lists the T1x magazines. A spare magazine makes range sessions smoother, especially with the Hunter’s short magazine. None of the T1x rifles has iron sights, so you will need a scope. Our guide to the best scope mounts for the Tikka T3x covers the centerfire rifles, and we do not make fit claims for the T1x there.
Trade-Offs to Weigh
No rimfire does everything, and the T1x has trade-offs. It is offered in .22 LR and .17 HMR in our listings, so if you want .22 WMR you will look at another brand. None of the rifles has iron sights, so you need to plan for a scope and mounts. The Hunter’s short flush magazine holds fewer rounds than the 10-round magazines on the other three models. On the other side of the ledger, the T1x gives you four distinct stock styles on one action, and the MTR, UPR, and Ace Target all use 10-round magazines.
Which Tikka T1x Should You Buy?
Think about where the rifle will live. A rifle that rides in a truck or on a farm suits the MTR or the Hunter, and one that spends its time at the range suits the Ace Target. Whichever you choose, add a scope and a second magazine before your first trip.
- Target shooting and small-game hunting: the MTR.
- An adjustable fiberglass stock: the UPR.
- A chassis with rails and an adjustable rear stock: the Ace Target.
- A wood stock and a traditional look: the Hunter.
- A left-hand rifle: the MTR Left-Hand, in .22 LR or .17 HMR.
Shop Tikka T1x Rifles
All four models are part of the Tikka rifles range. Browse the full set on our Tikka T1x rimfire rifles page.
Related Comparisons
FAQ
MTR stands for Multi-Task Rimfire. It is the T1x with a black synthetic, modular stock, aimed at target shooting and small-game hunting.
Yes. We list the MTR, UPR, and Ace Target in .17 HMR, along with .22 LR rifles.
Mainly the stock. The MTR has a black synthetic modular stock, and the UPR has a Desert Sand fiberglass stock with carbon fiber bedding surfaces and an adjustable cheek piece.
Yes. Tikka makes the T1x MTR in left-hand versions in .22 LR and .17 HMR.
The twist rate is 1:16.5 inches in .22 LR and 1:9 inches in .17 HMR on every configuration.
Both are adjustable-trigger bolt-action rimfires with several stock styles. CZ describes user-swappable barrels and calibers on the 457 Hunter Veil, while the T1x offers a barreled action that matches the T3x footprint and an Ace Target chassis.

Leave a Reply