EOTECH Risers & Magnifier Mounts

EOTECH Risers & Magnifier Mounts

6 products available

Showing all 6 resultsSorted by popularity

Shop EOTECH Riser Mounts from Unity Tactical

An EOTECH riser lifts your holographic sight higher above the rail so you can shoot from a more heads-up posture, with or without a magnifier. This collection carries the Unity Tactical FAST parts that fit EOTECH sights and magnifiers: the FAST Optic Riser, the FAST Absolute Riser, and the FAST FTC OMNI magnifier mount, each in black or flat dark earth (FDE). Both risers put the sight’s optical centerline 2.26 inches above the rail, a height Unity says promotes faster reticle acquisition, even when you wear a headset, night-vision goggles, or a protective mask.

FAST Optic Riser or FAST Absolute Riser?

Choose by co-witness height, which is where your iron sights line up in the EOTECH window. EOTECH says that sights with side buttons or a factory quick-detach lever co-witness in the lower 1/3 of the window, while all other models co-witness in the center, known as absolute co-witness.

  • FAST Optic Riser: Unity builds it for lower 1/3 co-witness sights such as the EXPS series, so it is the match for the EOTECH EXPS3 and EOTECH EXPS2.
  • FAST Absolute Riser: Unity builds it for absolute co-witness sights such as the XPS series, so it suits the EOTECH XPS2 and EOTECH XPS3. Unity’s FAST compatibility tool also pairs it with the EOTECH 512.

The Matching EOTECH Magnifier Mount

Unity says both risers pair with any FAST FTC magnifier mount. For an EOTECH magnifier, that means the FAST FTC OMNI, which Unity lists for the G23, G30, G33, G43, and G45. It holds the magnifier at the same 2.26-inch optical centerline as the raised sight, so the two line up. Where EOTECH’s STS mount switches the magnifier to the side, the OMNI pivots it down to stow below the sight plane, within the footprint of the receiver. It has an integrated FAST QD lever and includes screws for EOTECH magnifiers.

Need the magnifier too? Shop EOTECH G33 and EOTECH G43 3x magnifiers or the 5x EOTECH G45, and choose a no-mount version for the OMNI. Our EOTECH G33 vs G43 vs G45 guide compares them.

Build the Rest of Your Setup

Browse our EOTECH holographic sights and EOTECH magnifiers, see more from Unity Tactical, or view everything we carry from EOTECH. Our guide to the best EOTECH riser covers co-witness heights and magnifier setups in more depth.

Frequently Asked Questions

Which Unity riser fits my EOTECH?

It depends on your sight’s co-witness height. The FAST Optic Riser is built for lower 1/3 co-witness sights such as the EXPS series, and the FAST Absolute Riser is built for absolute co-witness sights such as the XPS series and, per Unity’s compatibility tool, the EOTECH 512. Both put the sight’s optical centerline 2.26 inches above the rail.

Why mount an EOTECH on a riser?

EOTECH sights mount directly to a 1-inch Weaver or MIL-STD-1913 rail, so a riser is optional. Unity says its 2.26-inch FAST height promotes a heads-up posture and faster reticle acquisition, even when you wear a headset, night-vision goggles, or a protective mask.

How does an EOTECH attach to a Unity riser?

The riser clamps to your MIL-STD-1913 rail with its included rail clamp and two cross bolts. Unity’s instructions say to mount the EOTECH on top using the hardware that came with your sight.

Which Unity magnifier mount fits EOTECH magnifiers?

Unity lists the EOTECH G23, G30, G33, G43, and G45 as compatible with its FAST FTC OMNI, which holds the magnifier at the same 2.26-inch optical centerline as the FAST risers. It pivots the magnifier down to stow below the sight plane and has an integrated FAST QD lever. Unity notes that some optic combinations may slightly block the sight picture when stowed, though most will not.