
The Osight SE vs C choice comes down to the cut on your slide and whether you want the emitter enclosed. The Osight SE is a compact, enclosed optic on the RMSc footprint, sized for slimline and compact carry pistols. The Osight C is a larger open-emitter optic on an RMR-pattern footprint, with a bigger 0.95 x 0.75 in. window and a 3 MOA dot inside a 32 MOA circle.
Buy the SE if your pistol is cut for RMSc (or for DPP or MOS, since the SE comes in those versions too) and you want the emitter protected from dust, debris, and moisture on a gun you carry every day. Buy the C if your slide has an RMR-pattern cut and a bigger window matters more to you than an enclosed housing.
| Spec | Osight SE (RMSc) | Osight C | Osight K |
|---|---|---|---|
| Emitter | Enclosed | Open | Open |
| Footprint | RMSc (DPP and MOS versions also made) | RMR pattern (407C/507C cut) | RMSc |
| Reticle | 2 MOA dot and 32 MOA circle, or 6 MOA dot | 3 MOA dot and 32 MOA circle | 6 MOA dot |
| Window | 0.83 x 0.55 in. | 0.95 x 0.75 in. | 0.83 x 0.55 in. |
| Dimensions | 1.59 x 0.98 x 0.97 in. | 1.77 x 1.18 x 1.18 in. | 1.59 x 0.98 x 0.98 in. |
| Battery | CR1620, side-loading | CR1632, side-loading | CR1620, side-loading |
| Rated battery life | Up to 75,000 hours (2 MOA red, mode 3, dot only) | Up to 100,000 hours red or 130,000 hours green (mode 3, dot only) | Up to 63,000 hours (red) |
| Brightness settings | 8 daylight and 2 night vision | 8 daylight and 2 night vision | 8 daylight and 2 night vision |
| Motion sensor | Yes | Yes | Yes |
| Adjustment | 1 MOA per click, ±35 MOA | 1 MOA per click, ±45 MOA | 1 MOA per click, ±35 MOA |
| Water rating | IPX7 | IPX6 | IPX6 |
| Housing | 7075 aluminum | 7075 aluminum | 7075 aluminum |
Osight SE vs C: What Is the Difference?
These are two different classes of optic, not two trims of the same sight. Three things separate them.
- Enclosed or open: The SE’s housing encloses the emitter, which helps keep dust, debris, and moisture off it. The C is an open-emitter design, which gives it a wide field of view but leaves the emitter exposed to whatever lands on the slide.
- Size: The SE measures 1.59 x 0.98 x 0.97 in. and weighs 0.97 oz. The C measures 1.77 x 1.18 x 1.18 in., so it is longer, wider, and taller, and it is also the heavier optic.
- Window: The RMSc SE has a 0.83 x 0.55 in. window. The C’s 0.95 x 0.75 in. window is noticeably taller, which makes the dot easier to find when your presentation is a little off.
The water ratings differ as well. The SE is rated IPX7, which covers temporary immersion, while the C is rated IPX6, which covers strong water jets but not submersion. In short, the SE gives up window size for a smaller, enclosed body that suits a carry gun, and the C gives up that protection for a bigger window on a larger slide.
Footprint: RMSc, DPP, and MOS vs RMR Pattern
Check the footprint before anything else, because it decides whether the optic bolts straight onto your slide. The standard Osight SE uses the RMSc footprint, which fits many optics-ready compact and slimline pistols. The Osight C uses an RMR-pattern footprint, listed as the 407C/507C cut, which is the same cut the Holosun 407C and 507C use. The two patterns are not interchangeable.
The SE also comes in two other footprints. The Osight SE DPP fits DPP-cut slides and has a larger body (1.83 x 1.12 x 1.11 in.) with a 0.91 x 0.71 in. window, close to the C’s window size. The Osight SE MOS mounts on MOS-cut slides, measures 2.44 x 1.02 x 1.10 in., and runs on a CR1632 instead of a CR1620, with a rated life of up to 140,000 hours (mode 3, dot only).
If your slide has an RMR-pattern cut and you still want the SE, Osight makes an RMR to RMSc adapter plate that lists the SE and S as compatible and includes mounting screws. A direct-fit optic is simpler when one suits you, but the plate lets you run an RMSc optic on an RMR-cut slide.
Reticle, Battery, and Controls
The Osight SE 2 MOA lets you choose a 2 MOA dot, a 32 MOA circle, or both together, so you can use the fine dot for deliberate shots and the circle for fast work up close. The SE also comes as a 6 MOA dot-only model in red and green. The C pairs a 3 MOA dot with a 32 MOA circle and comes in red or green. A 2 MOA dot covers less of a distant target, while a 3 MOA dot is a little easier to pick up quickly.
Both optics use side-loading coin cells, so you can change the battery without removing the optic, which helps preserve your zero. The RMSc SE takes a CR1620 rated up to 75,000 hours (2 MOA red, mode 3, dot only). The C takes a larger CR1632 rated up to 100,000 hours in red or 130,000 hours in green, also measured in mode 3, dot only.
Most other features match. Both have 8 daylight and 2 night-vision brightness settings, a motion sensor that powers the optic on with movement, 1 MOA clicks, and 7075 aluminum housings. The C has more adjustment travel, at ±45 MOA versus ±35 MOA for the SE.
Osight C vs K: Full-Size or Compact Open Dot?
If you have already settled on an open emitter, the Osight K is the compact alternative to the C. Like the SE, it uses the RMSc footprint, a 0.83 x 0.55 in. window, and a side-loading CR1620, but its emitter is open and its reticle is a single 6 MOA dot. It measures 1.59 x 0.98 x 0.98 in., weighs 1.02 oz, and is rated IPX6.
Choose the C for an RMR-pattern slide, a bigger window, and the circle-dot reticle. Choose the K for an RMSc-cut carry pistol where a bold dot and a small body matter more than a circle. The K comes in red and green. For the full compact lineup, see our Osight SE vs S vs K comparison.
Osight S vs X and SE vs X: The Rechargeable Models
The S and X are Osight’s rechargeable models. Instead of a coin cell, each uses a built-in rechargeable battery and a magnetic charging cover with a battery display. They split along the same lines as the SE and C.
| Spec | Osight S | Osight X |
|---|---|---|
| Emitter | Enclosed | Open |
| Footprint | RMSc | RMR pattern (407C/507C cut) |
| Reticle | 2 MOA dot and 32 MOA circle | 3 MOA dot and 32 MOA circle |
| Window | 0.83 x 0.55 in. | 0.94 x 0.85 in. |
| Dimensions | 1.59 x 0.98 x 0.97 in. | 1.77 x 1.18 x 1.3 in. |
| Weight | 0.97 oz | 1.62 oz |
| Power | Built-in rechargeable battery, magnetic charging cover | Built-in rechargeable battery, magnetic charging cover |
| Water rating | IPX7 | IPX6 |
The Osight S is the rechargeable version of the compact, enclosed design, with the same RMSc footprint, window, and size as the SE. It is rated up to 21,900 hours (level 3, dot only). Its charging cover holds up to three full recharges, and each one takes up to 1.5 hours. You can check the battery level on the cover and recharge the S without taking it off your pistol.
The Osight X is the rechargeable open optic on the RMR-pattern footprint. It has the tallest window in this comparison at 0.94 x 0.85 in., but it is also bigger and heavier than the S. Osight S vs X comes down to the same choice as SE vs C (compact and enclosed or full-size and open), with charging in place of coin cells.
Osight SE vs X crosses both lines: the SE is a compact, enclosed optic that runs on a CR1620, and the X is a full-size, open optic you recharge. Pick by footprint first, then by whether you would rather swap batteries or charge the optic. Compared with the C, the X adds window height and charging, while the C keeps a replaceable battery; our Osight XR vs X vs C comparison covers those three in detail.
Which Should You Buy?
- Osight SE: Buy it for a compact or slimline carry pistol cut for RMSc, DPP, or MOS when you want an enclosed emitter and an IPX7 rating.
- Osight C: Buy it for an RMR-pattern slide when you want the bigger window, the 3 MOA dot and 32 MOA circle, and a CR1632 with the higher battery rating.
- Osight K: Buy it for an RMSc slide when you want an open emitter and a single bold 6 MOA dot.
- Osight S or X: Buy one of these if you would rather recharge than replace batteries. The S is the compact, enclosed option, and the X is the full-size, open option.
If you want an enclosed emitter that mounts directly on an RMR-pattern slide, look at the full-size, enclosed XE and XR in our Osight SE vs XE vs XR comparison. For a quick overview of every model, read Osight Red Dot Models Explained.
Shop the Osight SE, C, and K
We stock the Osight SE in RMSc, DPP, and MOS versions, including red, green, and flat dark earth models, along with the Osight C in red and green. Start with your slide’s footprint, then pick the emitter style and reticle you want. You can browse every model on our Osight brand page.
- Osight SE red dot sights (RMSc, DPP, and MOS)
- Osight C open red dot, 3 MOA dot and 32 MOA circle
- Osight K open RMSc green dot, 6 MOA
- Osight S rechargeable enclosed RMSc red dot
Related Comparisons
FAQ
The Osight SE is a compact, enclosed optic on the RMSc footprint with a 0.83 x 0.55 in. window and an IPX7 rating. The Osight C is a larger open-emitter optic on an RMR-pattern (407C/507C) footprint with a 0.95 x 0.75 in. window and an IPX6 rating.
Neither is better across the board. The SE is better for compact carry pistols cut for RMSc, DPP, or MOS when you want an enclosed emitter, and the C is better for RMR-pattern slides when you want the bigger window.
Not directly, because the SE uses the RMSc footprint and the C uses an RMR-pattern footprint. Osight’s RMR to RMSc adapter plate lists the SE as compatible and lets you mount it on an RMR-cut slide.
No. The RMSc Osight SE uses a side-loading CR1620, and the Osight C uses a side-loading CR1632. The SE MOS version also uses a CR1632.
Both are open-emitter optics. The C is a full-size RMR-pattern optic with a 3 MOA dot and 32 MOA circle, while the K is a compact RMSc optic with a single 6 MOA dot, a 0.83 x 0.55 in. window, and a weight of 1.02 oz.
Both are rechargeable with a magnetic charging cover. Get the S for an RMSc-cut pistol and an enclosed emitter, or get the X for an RMR-pattern slide and its larger 0.94 x 0.85 in. open window.
The SE is a compact, enclosed RMSc optic that runs on a CR1620 coin cell. The X is a full-size, open RMR-pattern optic with a built-in rechargeable battery and a taller 0.94 x 0.85 in. window.

Leave a Reply