
Osight SE vs XR comes down to size and power. The SE is a compact enclosed optic on the RMSc footprint that runs on a side-loading CR1620 coin cell, while the XR is a full-size enclosed optic on the RMR footprint with a built-in rechargeable battery and a magnetic charging cover. The XE sits between them: it has the XR’s full-size RMR body and 0.91 x 0.71 in. window, but it runs on a side-loading CR1632 instead of a rechargeable battery.
Buy the SE for a compact or slimline carry pistol cut for RMSc, or choose its DPP or MOS version if your slide uses one of those cuts. Buy the XE if your pistol takes an RMR-footprint optic and you would rather swap a coin cell now and then. Buy the XR if you want that same full-size enclosed optic but would rather recharge it than buy batteries.
| Spec | Osight SE | Osight XE | Osight XR |
|---|---|---|---|
| Size class | Compact | Full-size | Full-size |
| Footprint | RMSc (DPP and MOS versions) | RMR | RMR |
| Reticle | 2 MOA dot & 32 MOA circle, or 6 MOA dot | 2 MOA dot & 32 MOA circle (red adds 6 MOA dot) | 2 or 6 MOA dot & 32 MOA circle |
| Window | 0.83 x 0.55 in. | 0.91 x 0.71 in. | 0.91 x 0.71 in. |
| Power | CR1620, side-loading | CR1632, side-loading | Built-in rechargeable, charging cover |
| Rated runtime | Up to 75,000 h | Up to 105,000 h | 54,000 h per charge; 324,000 h with cover |
| Brightness | 8 daylight, 2 night vision | 8 daylight, 2 night vision | 8 daylight, 3 night vision |
| W&E travel | ±35 MOA | ±45 MOA | ±45 MOA |
| Dimensions | 1.59 x 0.98 x 0.97 in. | 1.91 x 1.20 x 1.16 in. | 1.91 x 1.18 x 1.16 in. |
| Weight | 0.97 oz | 1.80 oz | 1.69 oz |
| Backup sight | Not listed | CBRS | CBRS |
| Water rating | IPX7 | IPX7 | IPX7 (cover IPX4) |
SE figures are for the standard RMSc model, and the SE and XE runtimes are for red models on the 2 MOA dot. Runtimes are Olight’s maximums at different test settings, so treat them as rough guides.
Osight SE vs XR: Compact Coin Cell or Full-Size Rechargeable?
Apart from the enclosed emitter, motion sensor, and IPX7 rating they share, these two differ almost everywhere.
- Size: The XR measures 1.91 x 1.18 x 1.16 in. and weighs 1.69 oz. The SE measures 1.59 x 0.98 x 0.97 in. and weighs 0.97 oz, which makes it the easier optic to carry on a slim pistol.
- Window: The XR’s window is 0.91 x 0.71 in., and the standard SE’s is 0.83 x 0.55 in. Most of the difference is in height, and the taller window makes the dot easier to find on the draw and to track through recoil.
- Reticle: The XR lets you choose a 2 MOA or 6 MOA dot, a 32 MOA circle, or either dot inside the circle. Each SE is set up one way: a 2 MOA dot and 32 MOA circle you can run separately or together, or a 6 MOA dot only.
- Power: The SE uses a CR1620 you can change without removing the optic. The XR’s built-in battery is rated up to 54,000 hours per charge (mode 4, 2 MOA dot only), and its USB-C charging cover extends total runtime to as much as 324,000 hours. The XR itself is IPX7, but the charging cover is rated IPX4.
- Adjustment and extras: The XR has ±45 MOA of windage and elevation travel versus ±35 MOA for the SE, a third night-vision brightness setting, and an integrated collapsible backup rear sight (CBRS).
On a compact carry pistol, the SE is the practical choice. On a full-size pistol cut for RMR, the XR gives you the bigger window and spares you battery changes.
Osight SE vs XE: Compact or Full-Size, Both on Coin Cells
The SE vs XE question is mostly about size, because both use a side-loading coin cell you can replace without removing the optic. The XE takes a CR1632 and is rated up to 105,000 hours on the red model (mode 3, 2 MOA dot only), compared with up to 75,000 hours for the 2 MOA red SE on its CR1620 (mode 3, dot only). Like the XR, the XE has a 0.91 x 0.71 in. window, ±45 MOA of travel, and a collapsible backup rear sight. It weighs 1.80 oz, nearly twice as much as the SE.
Reticle choices differ, too. The red Osight XE AMRS gives you 2 MOA and 6 MOA dots, a 32 MOA circle, and circle-dot combinations, while the Osight XE green dot runs a 2 MOA dot, a 32 MOA circle, or both. The SE comes in 2 MOA dot and 32 MOA circle versions and in 6 MOA dot-only versions such as the Osight SE 6 MOA green dot.
XE vs SE DPP: The Osight SE DPP is the SE built for DeltaPoint Pro cuts, and its 0.91 x 0.71 in. window is the same size as the XE’s. It is still the smaller optic (1.83 x 1.12 x 1.11 in. vs 1.91 x 1.20 x 1.16 in.) and runs on a CR1620, so let the footprint your slide is cut for decide between them.
XE vs XR: These two share the RMR footprint, window, travel, and backup sight. The XE runs on a replaceable CR1632 and weighs 1.80 oz, while the XR recharges and weighs 1.69 oz. Our Osight XE vs XR comparison covers the rest.
Osight S vs XR: Rechargeable in Two Sizes
The Osight S is the rechargeable compact model. It shares the SE’s RMSc footprint, 0.83 x 0.55 in. window, 1.59 x 0.98 x 0.97 in. dimensions, and 0.97 oz weight, but it replaces the CR1620 with an internal rechargeable battery and a magnetic charging cover that shows the battery level. Olight rates it up to 21,900 hours (level 3, dot only), and the cover provides up to 3 full recharges, each taking up to 1.5 hours.
Think of the S and XR as the rechargeable pair and the SE and XE as the coin-cell pair. Compared with the S, the XR has a larger window, a 6 MOA dot option, and a longer rated runtime per charge, although Olight tests the two at different settings. The S has a 2 MOA dot and 32 MOA circle and is the smaller, lighter optic for carry. Our Osight SE vs S vs K comparison puts the compact models side by side.
Osight X vs XE and C vs XE: Open or Enclosed?
The X, C, and XE are all full-size optics on an RMR-pattern footprint, so this choice is about the emitter. The open X and C give you larger windows. The enclosed XE protects the emitter from dust, rain, and debris and is rated IPX7, compared with IPX6 for the two open models.
Osight X vs XE: The Osight X is the rechargeable open model, with a magnetic charging cover, a 3 MOA dot and 32 MOA circle, and a 0.94 x 0.85 in. window that is taller than the XE’s. It weighs 1.62 oz versus 1.80 oz for the XE. The XE gives you an enclosed emitter, a replaceable CR1632, a 2 MOA dot (plus 6 MOA options on the red model), and a backup rear sight. If you want enclosed and rechargeable, that is the XR, not the X.
Osight C vs XE: The Osight C is the closest open-emitter match to the XE. Both run on a side-loading CR1632 and have 8 daylight and 2 night-vision brightness settings, ±45 MOA of travel, and a motion sensor. The C is open, uses a 3 MOA dot and 32 MOA circle, and has a 0.95 x 0.75 in. window, slightly larger than the XE’s. Choose the C for the bigger window and the XE for the enclosed emitter. Our Osight SE vs C comparison and Osight XR vs X vs C guide go further into the open models.
Footprint and Mounting
The standard SE’s RMSc footprint fits many optics-ready compact and slimline slides. For other cuts, choose the SE DPP covered above or the Osight SE MOS, which mounts directly to compatible full-size GLOCK MOS slides without an adapter plate. The MOS version runs on a CR1632 rated up to 140,000 hours (mode 3, dot only).
The XE and XR use the RMR footprint, a widely used pattern on full-size pistol slides and adapter plates. Neither mounts directly to an RMSc cut, but the reverse works: the Osight RMR to RMSc adapter plate lets you run an SE or S on an RMR-cut slide. The plate adds height under the optic, so check how the dot lines up with your iron sights.
Which Should You Buy?
- Osight SE: Best for compact carry pistols cut for RMSc, DPP, or GLOCK MOS when you want a replaceable coin cell.
- Osight S: The same compact size and RMSc footprint as the standard SE, with a rechargeable battery instead of a coin cell.
- Osight XE: Best for full-size pistols cut for RMR when you want an enclosed emitter and a replaceable CR1632. Choose the red AMRS model for 6 MOA dot options.
- Osight XR: Best for full-size pistols cut for RMR when you want an enclosed emitter and would rather recharge than change batteries.
- Osight X or C: Open-emitter, full-size options with larger windows, if you do not need an enclosed emitter.
Shop Osight Enclosed Red Dots
Start with the footprint your slide is cut for, then choose between a coin cell and a rechargeable battery. Browse the full Osight red dot lineup, or go straight to the three optics compared here.
- All Osight SE Red Dot Sights (RMSc, DPP, and MOS)
- Osight SE Enclosed RMSc Red Dot Sight, 2 MOA Dot & 32 MOA Circle
- Osight XE AMRS Enclosed RMR Red Dot Sight, 2/6 MOA Dot & 32 MOA Circle
- Osight XR Enclosed RMR Red Dot Sight, 2/6 MOA Dot & 32 MOA Circle
Related Comparisons
FAQ
It depends on your pistol. The SE suits compact carry guns cut for RMSc; it weighs 0.97 oz and uses a replaceable CR1620. The XR suits full-size pistols cut for RMR, with a larger 0.91 x 0.71 in. window and a rechargeable battery with a charging cover.
Both are enclosed and use replaceable side-loading coin cells. The SE is a compact RMSc optic with a 0.83 x 0.55 in. window and a CR1620. The XE is a full-size RMR optic with a 0.91 x 0.71 in. window, a CR1632, ±45 MOA of travel, and a collapsible backup rear sight.
The X is an open-emitter, rechargeable optic with a 3 MOA dot, a 32 MOA circle, and a taller 0.94 x 0.85 in. window. The XE is enclosed, runs on a CR1632, uses a 2 MOA dot and 32 MOA circle (the red model adds 6 MOA dot options), and is rated IPX7 instead of IPX6.
Both are full-size optics that run on a side-loading CR1632. Choose the C for its open design and slightly larger 0.95 x 0.75 in. window, or the XE for an enclosed emitter, an IPX7 rating, and a backup rear sight.
Close. Both are enclosed and rechargeable with a magnetic charging cover, but the S is a compact RMSc optic with a 2 MOA dot and 32 MOA circle, while the XR is a full-size RMR optic with 2 and 6 MOA dot options and a larger window.
Neither. Both have a 0.91 x 0.71 in. window. The SE DPP fits DeltaPoint Pro cuts and runs on a CR1620, while the XE fits RMR cuts, runs on a CR1632, and adds a backup rear sight.
The XE AMRS is the red XE, with 2 MOA and 6 MOA dots, a 32 MOA circle, and circle-dot combinations on a full-size RMR body. Each SE is set up with either a 2 MOA dot and 32 MOA circle or a 6 MOA dot only, on a compact body.

Leave a Reply