
EOTECH vs Aimpoint comes down to the sight picture you want and how long you want a battery to last. An EOTECH holographic sight such as the EXPS3-0 puts a 68 MOA ring around a 1 MOA dot. An Aimpoint Micro T-2 or PRO gives you a single 2 MOA red dot and a far longer battery rating, and the T-2 is much smaller and lighter.
Choose an Aimpoint if you want a sight you can leave switched on for years. Choose an EOTECH if you want the ring-and-dot reticle, plan to add a magnifier, or want the mount built into the sight. All Aimpoint figures in this comparison come from Aimpoint’s own published specifications.
| Spec | EOTECH EXPS3-0 | Aimpoint Micro T-2 | Aimpoint PRO |
|---|---|---|---|
| Sight type | Holographic | LED red dot | LED red dot |
| Reticle | 68 MOA ring, 1 MOA dot | 2 MOA dot | 2 MOA dot |
| Battery | CR123 | CR2032 | 1/3N lithium |
| Rated battery life | 1,000 hours at setting 12 | 50,000 hours at daylight setting 8 | 30,000 hours at daylight setting 7 |
| Brightness settings | 20 daylight, 10 night vision | 8 daylight, 4 night vision | 6 daylight, 4 night vision |
| Length | 3.8 in | 3.1 in with mount | 5.2 in with mount |
| Weight | 11.2 oz | 4.6 oz with mount | 12.6 oz with mount |
| Water resistance | 33 ft | 80 ft | 150 ft |
Aimpoint’s length and weight figures include the T-2’s standard mount and the PRO’s QRP2 mount and spacer; the EXPS3-0’s base is built in. Each maker rates battery life at its own brightness setting, so compare those figures loosely.
Does Aimpoint Make a Holographic Sight?
No. Aimpoint makes LED red dot sights, and its spec sheets describe the Micro T-2 and PRO as reflex collimator sights. The company says its first model, launched in 1975, was the world’s first commercial red dot sight.
EOTECH builds holographic weapon sights (HWS), which work differently. EOTECH says the HWS is powered by a laser diode instead of an LED and that its reticle appears to sit out at the target, so you can focus on the reticle and the target at the same time. It also says the sight keeps working when the window is partially shattered or covered with mud or snow.
Both makers list unlimited eye relief, and both address parallax: Aimpoint calls the T-2 and PRO operationally parallax free, while EOTECH says the HWS minimizes parallax by focusing the reticle at distance. Our holographic sight vs red dot guide goes deeper.
Aimpoint T-2 vs EOTECH EXPS3
Beyond battery life, the T-2’s big edge is size and weight. Aimpoint built it for shooters who need a rugged, lightweight, and compact sight, and with its standard mount it weighs less than half as much as an EXPS3-0.
Plan for height, though. On its standard mount, the T-2’s optical axis sits 20 mm (0.8 inch) above the rail, and Aimpoint sells Micro spacers that raise it to 30, 33, or 39 mm. The EXPS3-0’s quick-detach base is raised 7 mm and set for a lower 1/3 co-witness with iron sights, so there are no rings or spacers to add.
The EXPS3-0 answers with EOTECH’s ring-and-dot reticle, 30 brightness settings to the T-2’s 12, and side buttons you can still reach with a magnifier behind the sight. If you like the T-2’s light weight but want EOTECH’s reticle, look at the EOTECH XPS3, the lightest night-vision-compatible HWS family in the lineup. The XPS3-0 weighs 9.0 oz.
Aimpoint PRO vs EOTECH
The PRO, short for Patrol Rifle Optic, is Aimpoint’s full-size 30 mm tube. It comes with a QRP2 mount and a removable AR-15 spacer, which together put the optical axis 1.5 inches above the rail. Its standout rating is water resistance: Aimpoint says it is submersible to 150 feet.
Mounted, the PRO is heavier and longer than an EXPS3-0, so the case for it rests on battery life and water resistance, not size. Its closest counterparts are the EXPS3 and the EOTECH EXPS2, which drops the night vision settings but keeps the quick-detach base and side buttons.
If you would rather run easy-to-find AA batteries, browse our AA-battery EOTECH sights. The 512 takes two AA batteries, lithium or alkaline, but it has no night vision settings, and at 5.6 inches it is longer than the EXPS models.
Battery Life: Aimpoint’s Biggest Advantage
In any Aimpoint vs EOTECH comparison, battery life is the clearest win for Aimpoint. Aimpoint describes the T-2’s rating as over 5 years of constant operation and the PRO’s as over 3 years. EOTECH rates the EXPS3-0, XPS3-0, and XPS2-0 at 1,000 continuous hours at nominal setting 12, and green-reticle models such as the EXPS2-0 Green at 600 hours.
In practice, you can leave an Aimpoint switched on, while an EOTECH is a sight you turn on when you pick up the rifle. EOTECH also lets you choose the battery: the company says AA models run longer and use easier-to-find batteries, while CR123 models are more compact. Our EOTECH battery life guide breaks it down by model.
Reticle: 68 MOA Ring vs 2 MOA Dot
EOTECH calls its 68 MOA ring a speed ring. The company says the big ring is quick to center at close range and its four hash marks lead your eye to the 1 MOA dot, a precise aiming point for careful shots. On models such as the XPS3-0, the reticle also provides three aiming points calibrated for 62-grain .223 ammunition at about 2,900 fps.
The T-2 and PRO use a single 2 MOA dot. Aimpoint says a 2 MOA dot doesn’t hide small or distant targets and that you can turn the brightness up to make it look bigger for fast shooting. If you want nothing in the window but a dot, that simplicity is a real strength.
Neither is better for everyone, so look through both if you can. Our EOTECH reticle guide covers EOTECH’s other patterns.
Magnifiers: EOTECH’s Strongest Argument
Add a magnifier and the reticle difference grows. EOTECH says its HWS dot stays 1 MOA regardless of magnification, while the aiming dot on an LED-driven sight grows along with the target. The EOTECH G33 is built for this job, with 3x magnification, 2.2 inches of eye relief, and a 7.3° field of view. For a matched setup, the HHS VIII package pairs an EXPS3-0 with a G33.
Aimpoint has its own answer: it says the T-2’s 2 MOA dot and lens coatings make it a perfect match for its 3XMag-1 and 6XMag-1 magnifiers. Can you run an EOTECH magnifier behind an Aimpoint? EOTECH says you technically can use its magnifiers with other red dots, but they are designed to complement its HWS. Our EOTECH G33 vs G43 vs G45 guide compares the 3x and 5x options.
Night Vision Compatibility
Both brands make night-vision-compatible sights, but not every EOTECH is one. The EXPS3 and XPS3 add night vision settings to the daylight range, and EOTECH lists them for Gen I through III+ devices. The EXPS2, XPS2, and 512 have no night vision settings. Aimpoint lists both the T-2 and PRO as night vision compatible.
If night vision is part of your plan, choose an EXPS3 or XPS3. Leave the magnifier off at night, too: EOTECH says magnifiers don’t work well under night vision.
EOTECH vs Aimpoint: Which Should You Buy?
Pick by how you’ll run the rifle:
- Aimpoint Micro T-2: the lightest sight here and years of constant-on battery life, if a plain 2 MOA dot suits you.
- Aimpoint PRO: a full-size tube with the deepest water rating here, if the extra weight doesn’t bother you.
- EOTECH EXPS3: the ring-and-dot reticle, night vision settings, and a quick-detach base, plus a natural fit for a G33 magnifier.
- EOTECH XPS3: the same reticle and night vision settings in the lighter, lower XPS3-0.
- EOTECH XPS2 or EXPS2: the same reticle without night vision settings, with the EOTECH XPS2 as the more compact choice.
Still sorting out the EOTECH lineup? Our EOTECH models guide explains every holographic sight, magnifier, and Vudu scope.
Shop EOTECH Sights and Magnifiers
The collections below cover every EOTECH in this comparison, plus the magnifiers and combo packages that pair with them. You can also browse everything from EOTECH.
- EOTECH holographic sights, every HWS model we carry
- EOTECH EXPS3 sights, including the EXPS3-0 in tan
- EOTECH magnifier combos, such as the HHS VIII
- EOTECH magnifiers, including the G33 with STS mount
Related Comparisons
FAQ
Neither is better for every rifle. Aimpoint leads on battery life, and the T-2 is far lighter. An EOTECH gives you the 68 MOA ring and 1 MOA dot reticle and, according to EOTECH, a dot that stays 1 MOA behind a magnifier.
No. Aimpoint makes LED red dot sights, and its spec sheets describe the Micro T-2 and PRO as reflex collimator sights. If you want a holographic reticle, look at an EOTECH HWS.
The T-2 is smaller, lighter, and rated for far longer battery life. The EXPS3-0 counters with the ring-and-dot reticle, more brightness settings, and a quick-detach base set for a lower 1/3 co-witness.
The PRO is a full-size 30 mm tube sight with a 2 MOA dot, a 30,000-hour battery rating, and a 150-foot water rating. Mounted, it weighs more than an EXPS3-0 and gives up EOTECH’s ring-and-dot reticle.
EOTECH says you technically can use its magnifiers with other red dot sights, but they are designed to complement its holographic sights. Aimpoint pairs the T-2 with its own 3XMag-1 and 6XMag-1 magnifiers.
Aimpoint, by a wide margin. Aimpoint rates the T-2 at 50,000 hours and the PRO at 30,000 hours, while EOTECH rates the EXPS3-0 at 1,000 hours at nominal setting 12. Our EOTECH battery guide covers every model family.
Not technically. EOTECH says its holographic weapon sights are powered by a laser diode rather than an LED, though both types fill the same 1x role on a rifle. Our holographic sight vs red dot guide explains the difference.

Leave a Reply