Home » Blog » Optics » EOTECH » EOTECH OGL C Explained: Commercial Power vs Full Power

EOTECH OGL C Explained: Commercial Power vs Full Power

EOTECH OGL C

The EOTECH OGL C is the commercial version of the OGL Standard, the On-Gun Laser originally developed for military and law enforcement. EOTECH describes the OGL C as eye-safe and consumer-ready. It puts a green visible aiming laser, an infrared (IR) aiming laser, and an IR illuminator in one compact aluminum housing, and all three are rated Class 3R.

The full-power OGL Standard is restricted to military and law enforcement use, so the OGL C is the version we sell. It suits shooters who use night vision and want IR aiming, IR illumination, and a daylight-visible green laser in a single rail-mounted unit.

SpecificationOGL C (Commercial Power)
Visible aim laserGreen, 515 nm; ≤ 0.5 mW, Class 3R
IR aim laser830 nm; ≤ 0.67 mW, Class 3R
IR illuminatorVCSEL diode; ≤ 30 mW, Class 3R
Beam divergenceAim lasers < 0.5 MRAD; illuminator spot ≥ 30 MRAD, flood ≥ 105 MRAD
Battery and runtimeOne CR123 lithium battery; up to 9 hours
HousingAll-aluminum
ActivationFire button; Crane-type laser port; 7-inch Modlite remote switch included
MountingTop rail; adaptable to either side of the handguard
FinishesBlack or tan

What the OGL Does

OGL stands for On-Gun Laser. EOTECH announced the OGL C in January 2026 as the commercial variant of its OGL. You will also see it written as OGL-C or OGLC, but EOTECH styles the name OGL C.

Each of the OGL C’s three emitters has a separate job:

  • Green visible laser: your aiming point in daylight and whenever you are not using night vision. EOTECH says its green laser is six times easier to see than red lasers.
  • IR aiming laser: an aiming point you see through a night-vision device.
  • IR illuminator: a VCSEL diode that lights the scene in infrared, giving your night-vision device more light to work with.

How much you lean on the illuminator depends on the ambient light. In a dark building, it does most of the work, while on a brighter night the IR laser alone may be enough. Whatever the conditions, one housing and one battery cover daylight aiming, low-light work, and night-vision shooting, so you don’t need three separate devices competing for rail space.

The OGL C has no white light, though. If you were looking for a laser-light combo, plan on a separate weapon light.

OGL C vs the Full-Power OGL Standard

In its manual listings, EOTECH describes the OGL Standard, or OGL S, as full power and the OGL C as commercial power. The OGL C launch announcement sums up the split: “This commercial variant provides all the features and benefits of the standard OGL but with eye-safe visible and IR lasers and IR illumination.”

The practical difference is output. EOTECH lists the OGL Standard’s visible laser at up to 30 mW on its high setting, compared with up to 0.5 mW for the OGL C. It also rates the Standard’s high-power settings Class 3B instead of the OGL C’s Class 3R.

EOTECH says the commercial model is available to the general public. Laser rules vary by location, so check the laws where you live before you buy or use any laser.

Shoppers also compare the OGL with other aiming lasers such as the NGAL, but EOTECH’s OGL pages don’t make that comparison, so this guide sticks to the maker’s own figures.

EOTECH OGL C Features and Controls

Here is how the controls and hardware work:

  • Fire button: a large, raised, tactile button that EOTECH says you can locate easily, even in the dark. Press it for momentary operation, or give it a quick double tap for constant-on mode.
  • Mode selector: a tactile selector at the rear of the housing for picking the laser or laser-and-illumination combination you want, so you add the illuminator only when you need it.
  • Windage and elevation: the two co-aligned aiming lasers share these adjustments, which simplifies zeroing.
  • Illuminator adjustment: a sliding lever that takes the IR beam from a close-range flood to a long-range spot.
  • Remote port: a Crane-type laser port that EOTECH says takes most pigtail switches and hot buttons. The included remote switch is a 7-inch Modlite.
  • Covers and caps: protective covers and tethered caps, plus pattern generators.

Mounting, Battery, and Size

The top rail is the primary mounting position, and the OGL C can be adapted to either side of the handguard. EOTECH says ample separation between the lasers and the IR illuminator ensures no interference with front iron sights, and side mounting gives you another way to keep a front sight clear. Before you mount it, decide where your support hand will sit, since that is where the remote switch belongs.

Power comes from one CR123 lithium battery, rated for up to 9 hours of runtime. EOTECH gives the OGL Standard the same battery and runtime rating, so battery life is not where the two versions differ. Keep a spare CR123 with the rifle, and see our EOTECH battery life guide for other models.

The all-aluminum housing is compact, about the size of a deck of cards.

Who Should Buy the OGL C?

We based this verdict on EOTECH’s published specifications, not a hands-on test. On paper, the OGL C makes the most sense if you already shoot with night vision or plan to. If you don’t own night vision yet, get that first, because the OGL C’s IR laser and illuminator depend on it.

  • Buy it if you want an IR aiming laser, an adjustable IR illuminator, and a green visible laser in one housing, with a remote switch included.
  • Look elsewhere if you mainly want a white weapon light or a simple visible laser. Most of what sets the OGL C apart is on the IR side.
  • Pick the finish that matches your rifle. The black OGL C suits subdued builds, and the tan OGL C fits FDE and two-tone rifles. Both share the same feature set.

Still choosing the optic to run with it? Browse our EOTECH holographic sights, compare optic types in our holographic sight vs red dot guide, or start with our overview of EOTECH models.

Shop the EOTECH OGL C

We carry the OGL C in black and tan. Start with the collection, or go straight to the finish you want.

Related Comparisons

FAQ

What is the EOTECH OGL C?

The OGL C, short for On-Gun Laser Commercial Power, is the version of EOTECH’s OGL built for the consumer market. It combines a green visible aiming laser, an IR aiming laser, and an IR illuminator, all rated Class 3R.

Is there a civilian version of the EOTECH OGL?

Yes. EOTECH says the OGL C, its commercial model, is available to the general public, while the OGL Standard Power is restricted to military and law enforcement use.

What is the difference between the OGL C and the full-power OGL?

EOTECH describes the OGL Standard as full power and rates its high-power settings Class 3B, while the OGL C’s lasers and illuminator are rated Class 3R. EOTECH says the OGL C otherwise provides all the features and benefits of the standard OGL.

What battery does the EOTECH OGL C use?

It uses one CR123 lithium battery and is rated for up to 9 hours of runtime. Our EOTECH battery guide covers the rest of the lineup.

Does the OGL C come with a remote switch?

Yes. It includes a 7-inch Modlite remote switch for its Crane-type laser port, and the housing also has its own fire button for momentary or constant-on use.

Where does the OGL C mount on a rifle?

The top rail is its primary position, and it can be adapted to either side of the handguard. EOTECH says the separation between the lasers and the IR illuminator keeps them from interfering with front iron sights.

Who is the EOTECH OGL C for?

It suits shooters who use night vision and want IR aiming, adjustable IR illumination, and a green visible laser in one unit. If you mainly want a white light or a simple visible laser, a different product will serve you better.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *