SIG Sauer P365X 9mm pistol, 3.1-inch barrel, X-series grip, left side

Sig Sauer P365X Pistols

24 products available

Showing 1–12 of 24 resultsSorted by popularity

The SIG P365X keeps the original P365’s 3.1-inch slide and pairs it with the longer X-series grip module, a flat trigger, and an optic-ready compact slide cut. That is the SIG P365X in plain terms: more grip than a standard P365, without the longer slide of a P365 XL or the taller 17-round grip of a P365-XMACRO.

SIG Sauer rates the black optic-ready P365X at 5.8 inches overall, 1.1 inches wide, and 4.8 inches tall, with a 17.8-ounce weight on the iron-sight gun. A 12-round steel magazine sits flush in the X grip. Ten-round magazines are the capacity-limited pack, not a different pistol family. Factory packages add a manual safety, a special finish, or a mounted compact sight. None of those packages turn the P365X into an XL, an XMACRO, or a Fuse.

How the P365X differs from other P365 pistols

The SIG P365X is the short-slide P365 with the longer X-series grip. You get the original 3.1 in. slide with a grip you can actually fill, and an optic-ready Nitron slide. The optic cut is compact Shield RMSc. XRAY3 sights stay on the gun. The rail is SIG’s P365 rail, not 1913. The slide is not compensated. A factory red dot is installed only when this page says so. These pistols ship to a licensed FFL.

The P365 XL uses the same X-series grip as the P365X, then adds a 3.7-inch slide and a 6.6-inch overall length. If you want the longer sight radius and still want a 12-round flush grip, the XL is the longer-slide choice. If you want the shorter slide in a holster, stay on the P365X.

The P365-XMACRO is a different size again. It uses a 3.7-inch non-compensated slide on current non-COMP models, a taller grip that takes 17-round flush magazines, a 1913 rail, and interchangeable backstraps. A P365X does not. Compensated XMACRO slides belong with P365-XMACRO COMP, not with the P365X. The P365-FUSE is longer still, with a 4.3-inch barrel and 21-round magazines.

Optic-ready, factory optics, and what does not fit

Standard P365X slides are optic-ready on SIG Sauer’s Compact (Shield RMSc) footprint, with XRAY3 day/night sights and a removable rear sight plate. That cut can accept SIG ROMEOZero, ROMEO-RS Compact, and other RMSc-pattern sights when the screws and deck height match. It is not a universal mount for every compact red dot.

Factory optic pistols are separate models. ROMEO-RS Compact packages stay on the RMSc-pattern cut. ROMEO-X Compact packages also use that compact deck. ROMEO-X SIG-LOC packages use SIG-LOC Compact, a bottom-mount interface that is not a generic RMSc plate. Read the individual pistol page before buying a holster or a replacement sight. Related optics are grouped with ROMEO-X, ROMEO-RS, and ROMEOZero sights.

Finishes, safeties, and magazines

The core pistol is a black Nitron slide on a black X grip. Other P365X finishes in this lineup include coyote grip with black slide, stainless slide with black grip, teal grip, purple grip with stainless slide, rainbow PVD slide, and the OD-green Fortunate Son P365X. Those colors change appearance, not barrel length or rail type.

Manual-safety P365X pistols add a lever on the frame. When the safety is engaged, it is designed to block a trigger press. It does not replace safe handling. Ten-round P365X models keep the longer X grip and pack 10-round magazines for capacity-limited states, including a Massachusetts manual-safety SKU.

Unrestricted P365X pistols ship with 12-round steel magazines. Where lawful, 15-round and 17-round P365-family magazines can be used; they extend below the X grip unless the grip module is changed. Extra magazines are listed with P365 magazines.

Choosing a P365X

Start with the 12-round optic-ready P365X if you want the core gun with no mounted optic. Choose the 10-round P365X where magazine limits apply. Choose a manual-safety 12-round P365X if you want that lever.

Factory sight packages include the ROMEO-RS Compact P365X and the ROMEO-X SIG-LOC P365X. Match the holster to the grip length and to whether an optic is installed. Lights and lasers must be listed for the SIG rail used on P365X pistols, not for an XMACRO 1913 rail.

All of these pistols are serialized firearms and ship to a licensed FFL. Confirm magazine capacity, optic mount, and state restrictions on the exact model page before you order.

Frequently Asked Questions

What is a SIG P365X?

The SIG P365X is a 9mm P365-family pistol that keeps the original 3.1-inch P365 slide and uses the longer X-series grip module, a flat trigger, and an optic-ready compact slide cut. A 12-round magazine sits flush in that grip on unrestricted models.

How is the P365X different from the standard P365?

Both use a 3.1-inch-class slide. The P365X grip is longer, so a 12-round magazine sits flush, and the X-series trigger and optic-ready slide are standard on current P365X pistols. The original P365 uses a shorter grip and typically starts with 10-round flush magazines.

What is the difference between a P365X and a P365 XL?

They share the X-series grip. The P365X keeps the shorter 3.1-inch slide and a 5.8-inch overall length. The P365 XL uses a 3.7-inch slide and a 6.6-inch overall length for a longer sight radius.

Is the P365X the same as a P365-XMACRO?

No. The P365-XMACRO uses a taller grip with 17-round flush magazines, a 1913 rail, and a 3.7-inch slide on current non-compensated models. The P365X uses a SIG rail, 12-round flush magazines, and the short 3.1-inch slide.

Does the P365X have a compensator?

No. Current P365X catalog pistols use a non-ported 3.1-inch slide. Compensated slides belong to other P365-family models such as P365-XMACRO COMP, not to the P365X.

Is every P365X optic-ready, and will any compact red dot fit?

Current P365X pistols are optic-ready on SIG Sauer’s Compact (Shield RMSc) footprint unless they are a factory SIG-LOC package. RMSc-pattern sights can fit when the cut, screws, and height match. SIG-LOC is a different mount. Confirm the exact pistol before buying a sight or holster.

What magazines does a P365X use?

Unrestricted P365X pistols ship with 12-round steel magazines that sit flush in the X grip. Ten-round magazines are packed on capacity-limited models. Fifteen-round and 17-round P365-family magazines can be used where lawful; they extend below the X grip unless a longer grip module is fitted.