Trijicon Rifle Scopes

Browse Trijicon scopes across the ACOG, VCOG, AccuPoint, Credo, Tenmile, Huron, and Ascent families. Compare fixed and variable magnification, reticle designs, illumination systems, and mounting packages. The right comparison starts with the complete configuration, not simply the highest magnification or largest objective.

Explore a model family below, including the hunting-focused Credo HX and Tenmile HX ranges, or compare low-power variable scopes in the Trijicon LPVO collection.

Compare Trijicon Scope Families

ACOG and Compact ACOG: Fixed Magnification

Trijicon ACOG scopes have fixed magnification rather than a zoom ring. The ACOG 4×32 collection includes distinct illumination systems: the TA31F 4×32 uses fiber optics and tritium, while the TA02 4×32 LED uses an AA battery. Their red chevron and red crosshair reticles are different patterns, not interchangeable descriptions of the same optic.

The Compact ACOG family offers smaller fixed-power formats. For example, the 1.5x16S TA44-C-400329 pairs lower magnification with a green ring-and-dot reticle and a Q-LOC mount. Mounts and secondary optics vary by package, so check what is included with the exact model.

VCOG: Variable Power with an Integrated Mounting Interface

Trijicon VCOG scopes differ from ACOGs by offering variable magnification. The 1-6×24 and 1-8×28 configurations use first-focal-plane (FFP) reticles and AA-powered LED illumination. Their integrated mounting interface also distinguishes them from conventional tube scopes that use rings.

The package remains important. Model VC16-C-1600000 includes a TA51 thumbscrew mount, while VC18-C-2400013 includes a Q-LOC quick-release mount. The former has a caliber-specific reticle; the latter has an MOA pattern. Do not assume that magnification alone identifies the reticle, adjustment increment, or supplied mount.

AccuPoint: Battery-Free Illumination in a Variable Scope

Trijicon AccuPoint scopes combine fiber-optic and tritium illumination without a battery. This separates them from the LED-powered Credo and Tenmile ranges. The 1-6×24 TR25-C-200089 has an MOA-Dot reticle with a green center dot, while the 1-8×24 TR35-C-200183 uses the distinct BDC Hunter Holds pattern with a green dot. Both have second-focal-plane (SFP) reticles and 30 mm tubes.

The family also includes larger-objective configurations such as the 2.5-10×56. The 56 mm figure describes the objective lens, not the mounting tube. Reticle units and turret units deserve separate attention: the TR22-2G 2.5-10×56 has a Mil-Dot reticle but 1/4-MOA adjustments.

Credo and Credo HX: LED Illumination and Multiple Focal Planes

Trijicon Credo and the hunting-focused Credo HX family use CR2032-powered LED illumination. Both ranges include first- and second-focal-plane configurations, so neither family name nor magnification is enough to identify the reticle format.

The Credo 1-6×24 illustrates the distinction: CR624-C-2900015 combines an SFP red BDC Segmented Circle reticle with 1/4-MOA adjustments, while CR624-C-2900023 combines an FFP red MRAD Segmented Circle reticle with 0.1-MRAD adjustments. Illumination color is also model-specific. These two Credo models are red only; the Credo HX 1-8×28 CRHX828-C-2900031 offers selectable red and green illumination. Capped, locking, and return-to-zero turret designs should likewise be compared by exact model.

Tenmile and Tenmile HX: Higher-Magnification Choices

Trijicon Tenmile and Tenmile HX scopes offer higher-magnification configurations with CR2032-powered LED illumination. Tenmile includes MOA and MRAD reticle choices; the Tenmile HX configurations compared here use MOA reticles. Both ranges include first- and second-focal-plane models.

Even within the Tenmile 4.5-30×56 format, the MOA Precision Tree model TM3056-C-3000012 is FFP, while the MOA Long Range model TM3056-C-3000014 is SFP. In the hunting-focused HX range, the 3-18×44 TMHX1844-C-3000001 combines an FFP MOA Precision Tree reticle with selectable red/green illumination. The 6-24×50 TMHX2450-C-3000003 instead has an SFP MOA Ranging reticle, a red PowerDot, and low capped adjusters. These are meaningful differences beyond maximum magnification.

Huron and Ascent: Non-Illuminated Alternatives

Trijicon Huron and Ascent scopes provide non-illuminated reticles in second-focal-plane designs with capped adjustments. Unlike AccuPoint, they do not have a glowing reticle powered by fiber optics or tritium. A non-illuminated reticle is not the same as a battery-free illuminated reticle.

Huron emphasizes hunting configurations, with BDC Hunter Holds and German #4 Crosshair options. Its 3-9×40 models use 1-inch tubes. The Ascent 1-4×24 AT424-C-2800001 instead pairs a 30 mm tube with the BDC Target Holds reticle. Hunter Holds and Target Holds are distinct reticle names; compare the exact illustration rather than assuming that similar names mean identical markings.

Details Worth Comparing Before You Choose

• Magnification and objective: A 4×32 is fixed at 4x with a 32 mm objective; a 1-6×24 varies from 1x to 6x with a 24 mm objective. Compare the lower end as well as the upper end, alongside weight, length, and eye relief.
• Focal plane: An FFP reticle changes apparent size with magnification. An SFP reticle stays the same apparent size. This is a separate specification from reticle color and illumination source.
• Reticle and controls: Duplex, segmented-circle, and Precision Tree reticles offer different visual layouts. MOA and MRAD are different angular units, and reticle markings do not always match turret units. Check both fields and the click increment.
• Mounting and accessories: Objective diameter is not tube diameter, and matching tube diameter alone does not establish complete mount compatibility. Check whether the exact package includes a mount, rings, covers, or a second optic.

Trijicon Scopes FAQs

Do all Trijicon scopes need batteries?

No. AccuPoint uses battery-free fiber-optic and tritium illumination, while Huron and Ascent are non-illuminated. ACOG power sources vary by model. VCOG uses AA-powered LED illumination; the Credo, Credo HX, Tenmile, and Tenmile HX configurations discussed here use a CR2032 battery.

What is the difference between ACOG and VCOG?

ACOG scopes have fixed magnification. VCOG offers variable-power 1-6×24 and 1-8×28 configurations with first-focal-plane reticles and AA-powered illumination. Reticles and mount packages still vary within each family.

Are all Credo and Tenmile scopes first focal plane?

No. Credo, Credo HX, Tenmile, and Tenmile HX include both focal-plane designs. Two scopes with the same magnification can have different reticles and focal planes, so check the full model number and its FFP or SFP specification.

Can every illuminated model switch between red and green?

No. Some LED models offer both colors; others are separate red-only or green-only variants. The red-only Tenmile HX TMHX2450-C-3000003, for example, is different from the dual-color TMHX1844-C-3000001. A family name does not establish the available colors.

Does a Mil-Dot reticle mean the turrets use MIL adjustments?

No. The AccuPoint TR22-2G has a Mil-Dot reticle and 1/4-MOA clicks. MIL and MRAD refer to milliradians in these scope specifications, while MOA is a different angular unit. Read the reticle and adjustment specifications separately.

Is an LPVO a separate Trijicon model family?

No. LPVO means low-power variable optic. The LPVO collection brings together configurations from several families. A variable 1-6x scope belongs to that category; a fixed-power Compact ACOG does not become an LPVO simply because it has low magnification.

Does every scope include a mount or a second sight?

No. Included hardware depends on the exact package. ACOG and VCOG configurations can include dedicated mounts, while conventional tube scopes may require separate rings or a mount. An RMR or RCR is included only when the package explicitly lists that additional optic.