Home » Blog » Optics » EOTECH » EOTECH Models Explained: Holographic Sights, Magnifiers, and Vudu Scopes

EOTECH Models Explained: Holographic Sights, Magnifiers, and Vudu Scopes

EOTECH models

The EOTECH models we carry fall into five product lines: holographic weapon sights, the G-series magnifiers that sit behind them, Vudu riflescopes, EFLX reflex sights, and the OGL on-gun laser. The holographic sights are the heart of the lineup, and EOTECH sells them in three series: the lightweight XPS, the quick-detach EXPS, and the AA-powered 5 Series (512, 518, 552, and 558). Each sight’s model name also tells you whether it has night-vision settings and which reticle it uses.

Here is how the lineup breaks down:

  • EOTECH holographic sights: the XPS2, XPS3, EXPS2, and EXPS3 run on one CR123 battery, and the 512, 518, 552, and 558 take two AAs. Reticles include the standard ring and dot, plus dot-only, two-dot, four-dot, DCR, .300 Blackout, .308, and green versions.
  • EOTECH magnifiers: the G33 and G43 are 3x, and the G45 is 5x. EOTECH also pairs them with EXPS sights in Holographic Hybrid Sight (HHS) combos.
  • EOTECH Vudu scopes: the 1-6, 1-8, and 1-10 low-power variable optics (LPVOs); the compact 3-9 and 4-12; and the long-range 5-25. We also carry the Vudu X 1-6 and 2-12, the 3.5-18, and the 8-32.
  • EOTECH EFLX: a small reflex sight for pistols, offset rifle mounts, and Vudu scope packages.
  • EOTECH OGL: the OGL C, a commercial-power on-gun laser with green and infrared aiming lasers and an infrared illuminator.

Quick picks: an XPS2-0 for a daylight carbine, an EXPS3-0 for duty use or any rifle that may see night vision, an HHS combo for a magnified setup, a Vudu 1-6 or 1-10 if you want one scope that zooms from 1x, and an EFLX for a pistol. The sections below cover each line, and the buying guide near the end explains the picks.

How to Read EOTECH Model Names

EOTECH holographic sight names follow a pattern. Read an EXPS3-2 from left to right: EXPS is the body, the 3 means it has night-vision settings, and the -2 is the two-dot reticle. Change any part and you have a different sight, so learn the parts before you shop.

  • XPS or EXPS: the body. The XPS clamps to the rail with a cross bolt, keeps its buttons on the back, and sits at absolute co-witness, so your iron sights line up in the center of the window. The EXPS adds a raised base with a locking quick-detach (QD) lever, moves the buttons to the side, and co-witnesses in the lower 1/3 of the window. Both bodies are 3.8 inches long, but the EXPS is taller and weighs 11.2 oz to the XPS’s 9.0 oz. Our EOTECH XPS vs EXPS comparison covers the trade-offs.
  • 2 or 3: night vision. A 2 has 20 daylight brightness settings and none for night vision. A 3 adds 10 night-vision settings for Gen I through III+ devices and raises the water rating from 10 feet to 33 feet. That is most of the EOTECH EXPS2 vs EXPS3 decision.
  • The suffix: the reticle. A -0 is the standard 68 MOA ring with a 1 MOA dot, and a -1 is the 1 MOA dot alone. A -2 adds a second dot below the first as a holdover reference, and a -4 puts four 1 MOA dots in the ring for use behind a magnifier. DCR stands for Danger Close Reticle, -300 marks the .300 Blackout reticle, and Green models light the standard ring and dot in green. Our EOTECH reticle guide explains each pattern.
  • 512, 518, 552, and 558: the 5 Series. These are EOTECH’s AA-powered sights. The 512 and 552 have rear buttons and a cross-bolt mount like the XPS, while the 518 and 558 have side buttons and a QD lever like the EXPS. The 552 and 558 add 10 night-vision settings. Our EOTECH 512 vs 518 comparison covers the AA models in detail.

EOTECH Holographic Sight Families Compared

Every EOTECH holographic weapon sight (HWS) in this chart is a 1x sight with its mount built in, and each one fits a 1-inch Weaver or MIL-STD-1913 rail. Pick the family by battery, night vision, and mount, then choose the reticle.

FamilyBatteryNight-vision settingsMount and co-witness
XPS2One CR123NoneCross bolt, absolute
XPS3One CR12310Cross bolt, absolute
EXPS2One CR123NoneQD lever, lower 1/3
EXPS3One CR12310QD lever, lower 1/3
512Two AANoneCross bolt, absolute
518Two AANoneQD lever, lower 1/3
552Two AA10Cross bolt, absolute
558Two AA10QD lever, lower 1/3

XPS2 and XPS3: Low and Light

The XPS body is the one to choose for a rifle you run at 1x when weight matters. The EOTECH XPS2 is the daylight model, and its reticles include the -0, the dot-only -1, the two-dot -2, a green -0, and the .300 Blackout reticle of the XPS2-300. The EOTECH XPS3 adds night-vision settings and the 33-foot water rating without adding weight, which makes it the lightest night-vision-compatible HWS family in the lineup. We carry it as the XPS3-0 in black or tan, the two-dot XPS3-2, and the XPS3-DCR.

EXPS2 and EXPS3: Built for Magnifiers

The EXPS body is the better base for a magnified setup. Its side buttons stay within reach with a magnifier mounted behind the sight, and its QD lever allows fast installation and removal. The EOTECH EXPS2 has no night-vision settings and comes as the -0, the two-dot -2, and a green -0. The EOTECH EXPS3 offers the -0, -1, -2, -4, or DCR reticle, all with night-vision settings, and it is the sight in four of the five HHS combos we carry.

EOTECH also makes the hoodless EXPS3 HD. It replaces the buttons with left-side rotary controls, adds adaptive auto-brightness and EOTECH’s Shake-Awake technology, and has 7 daylight and 4 night-vision settings instead of 20 and 10. We list it with our other EXPS3 sights.

512, 518, 552, and 558: AA Power

The 5 Series trades size for battery convenience. All four are 5.6 inches long, compared with 3.8 inches for an XPS or EXPS. EOTECH says AA batteries increase battery life and are easier to find, while a CR123 is more compact. The 512 and 552 weigh 11.5 oz, and the 518 and 558 weigh 13.8 oz. Choose the 518 or 558 if you plan to add a magnifier, for the same side-button reason as the EXPS. All four are in our EOTECH 512, 518, 552, and 558 sights collection.

DCR, Green, and Caliber-Specific Reticles

Some shoppers start with the reticle instead of the body. EOTECH DCR sights use the Danger Close Reticle: a 68 MOA ring with a cutout at the top, a 1 MOA aiming dot, and a chevron at the bottom. With a 50-yard zero on a .223/5.56 rifle, EOTECH says it gives aiming points out to 200 yards plus a 7-yard hold at the chevron. We carry it on the EXPS3 and XPS3.

The trade-off with EOTECH green reticle sights is battery life: the XPS2-0 Green and EXPS2-0 Green are rated for 600 hours at brightness setting 12, against 1,000 for the red versions. For other calibers, the XPS2-300 has aiming points for supersonic and subsonic .300 Blackout loads, and the 552 XR308 swaps in a .308 ballistic reticle.

EOTECH Magnifiers and HHS Combos

An EOTECH magnifier mounts behind a holographic sight and flips aside on its switch-to-side (STS) mount when you want 1x. EOTECH lists the G33, G43, and G45 as compatible with all of its holographic sights, so the choice comes down to magnification, length, and weight.

MagnifierMagnificationLengthWeight with STS mount
G333x4 in.10.6 oz
G433x3.1 in.11.3 oz
G455x3.9 in.12.8 oz

Of the two 3x models, the EOTECH G33 is lighter on its STS mount, while the EOTECH G43 is 0.9 inches shorter, which helps on a short upper or a crowded rail. The EOTECH G45 steps up to 5x for small or distant targets, but it weighs the most and has roughly half the field of view of the 3x models. Our EOTECH G33 vs G43 guide also covers the G45, eye relief, and the no-mount versions.

If you don’t own a sight yet, an HHS package pairs an EXPS sight with a magnifier and mount. We carry five: the HHS VIII (EXPS3-0 and G33, in black or tan), HHS II (EXPS2-2 and G33), HHS VI (EXPS3-2 and G43), HHS V (EXPS3-4 and G45), and HHS IX (EXPS3-DCR and G45).

Whatever you choose, the magnifier has to sit at the same height as the sight in front of it. On an XPS, 512, or 552, the rear buttons face the magnifier, so leave room to reach them.

EOTECH Vudu Riflescopes

Vudu is EOTECH’s riflescope line. Start with the lowest magnification you need: the LPVOs begin at 1x, the compact 3-9 and 4-12 at 3x and 4x, and the 5-25 at 5x for long-range work. Then decide on the focal plane. A first-focal-plane (FFP) reticle grows and shrinks with the image, so its holds stay true at every power. A second-focal-plane (SFP) reticle stays the same size, which keeps the sight picture simple, but its holds are exact at only one magnification.

Vudu lineFocal planeReticlesMounting
Vudu 1-6×24FFPSR1 MRAD, SR2 7.62 BDC, SR3 5.56 BDC, plus green versions30 mm tube
Vudu 1-8×24SFPHC3 MOA, HC3 Green MOA30 mm tube
Vudu 1-10×28FFPSR4 MOA, SR5 MRAD (standard or Daylight Bright), LE5 MRAD34 mm tube
Vudu 3-9×32SFPHC1 MOA, MD6 MOA, MR5 MRADIntegrated base
Vudu 4-12×36FFPMD5 MRAD, MR5 MRADIntegrated base
Vudu 5-25×50FFPMD4 MOA; MD3, Horus H59, and Horus Tremor5 MRAD34 mm tube
Vudu X 1-6×24SFPBD1 MOA, DP1 MOA30 mm tube
Vudu X 2-12×40SFPBD1 MOA, DP1 MOA30 mm tube
Vudu 3.5-18×50FFP or SFPMD1 MRAD, MD2 MOA, Horus H59 MRAD (FFP); HC1 MOA (SFP)34 mm tube
Vudu 8-32×50SFPHC2 MOA34 mm tube

Vudu LPVOs: 1-6, 1-8, and 1-10

Of these three, the EOTECH Vudu 1-6 is the lightest at 20.1 oz and the only one with caliber-specific bullet drop compensator (BDC) reticles, for 5.56 or 7.62. Our EOTECH Vudu 1-6 review compares its SR1, SR2, and SR3. The EOTECH Vudu 1-8 is the SFP choice, and its duplex-style HC3 reticle stays bold at 1x, as our EOTECH Vudu 1-8 review explains. The EOTECH Vudu 1-10 reaches 10x and has the widest 1x field of view of the three (116.6 feet at 100 yards), but its 34 mm tube needs 34 mm rings or a matching mount. Our EOTECH Vudu 1-10 review weighs the SR4 against the SR5.

Compact Vudu Scopes: 3-9 and 4-12

The 3-9×32 and 4-12×36 are 6.8 and 7.1 inches long, respectively, and weigh about a pound each. Instead of using rings, each has an integrated base that EOTECH lists as compatible with most mini-ACOG mounts. The EOTECH Vudu 3-9 is the SFP option and has the wider view at low power. The EOTECH Vudu 4-12 is FFP, with MRAD reticles and 0.1 MRAD capped turrets. Both come scope-only or packaged with a mount and an EFLX reflex sight for close shots. Our EOTECH Vudu 3-9 review and EOTECH Vudu 4-12 review cover the reticle and package choices.

Long-Range Vudu: 5-25

The EOTECH Vudu 5-25 is the FFP scope to choose when distance is the point. It has a 34 mm tube, a 50 mm objective, and a push/pull locking elevation turret with EOTECH’s EZ Chek Zero Stop. At 11.2 inches, it is short for a 25x scope, though at 29.5 oz it is no lightweight. Our EOTECH Vudu 5-25 review compares its MOA and MRAD reticles.

Vudu X, 3.5-18, and 8-32

We carry three more Vudu lines. The EOTECH Vudu X scopes are SFP models with MOA reticles. The Vudu X 1-6×24 is an LPVO that weighs 17.8 oz, against 20.1 oz for the standard Vudu 1-6. The Vudu X 2-12×40 runs from 2x to 12x for rifles that need more magnification than a 1-6. The EOTECH Vudu 3.5-18 pairs a 34 mm tube with side parallax control and the EZ Chek Zero Stop, and it is the one Vudu line we sell in both focal planes. For the most magnification, the Vudu 8-32×50 SFP HC2 MOA has 0.125 MOA clicks and side parallax adjustment, and it needs no battery. Our EOTECH Vudu scope guide compares every line we carry.

EOTECH EFLX and OGL

EFLX Reflex Sights

The EFLX is EOTECH’s reflex sight: a small red dot with a large square window inspired by the holographic sight picture. The original EOTECH EFLX weighs 1.4 oz, uses the Leupold DeltaPoint Pro footprint, and comes in black or tan with a fixed 3 MOA or 6 MOA dot. Its CR2032 loads from the top, so you can change it without removing the optic. Choose the 3 MOA for precision work or a rifle-mounted setup, and the 6 MOA for a defensive pistol.

EOTECH also makes the enclosed EFLX CE, which adds Shield RMSc footprint compatibility, switchable reticles, and Shake-Awake activation. Our EOTECH EFLX footprint guide explains what fits and which version to buy.

OGL C On-Gun Laser

The OGL C is the commercial-power version of EOTECH’s On-Gun Laser. One aluminum housing holds a green visible aiming laser, an infrared (IR) aiming laser, and an IR illuminator, all rated Class 3R, and a single CR123 powers it for up to 9 hours. It includes a 7-inch Modlite remote switch, and our EOTECH OGL collection has it in black and tan. Because the IR laser and illuminator depend on night vision, buy the OGL C after you own a night-vision device. Our EOTECH OGL C explainer compares it with the full-power version. Laser rules vary by location, so check your local laws before you buy or use any laser.

Batteries, Risers, and Setup

Battery life follows the battery type. Most CR123-powered XPS and EXPS sights are rated for 1,000 continuous hours at brightness setting 12, while the 518, 552, and 558 are rated for up to 2,500 hours on lithium AA batteries or 2,200 on alkaline. Published runtime figures for the 512 vary, so we don’t list one. The EFLX and most Vudu scopes run on a CR2032. Our EOTECH battery life guide lists the ratings model by model.

A riser lifts the sight for a more heads-up shooting position. Unity Tactical builds its FAST risers around co-witness height: the FAST Optic Riser is for lower 1/3 sights such as the EXPS, and the FAST Absolute Riser is for absolute co-witness sights such as the XPS. Unity’s compatibility tool also pairs the Absolute Riser with the 512. Each riser puts the sight’s optical centerline 2.26 inches above the rail, and Unity’s FAST FTC OMNI holds a no-mount G33, G43, or G45 at that same height. That is higher than EOTECH’s co-witness guidance assumes, so check your iron sights after you mount a riser. Our guide to the best EOTECH riser covers each pairing, and our EOTECH risers and magnifier mounts collection lists the Unity parts; check it for current availability.

Without a riser, mount the sight directly to the rail, and its body sets the co-witness shown in the chart above. EOTECH’s help center has you finish the zero with live fire at 50 yards, using the center dot as your point of aim.

EOTECH vs Other Brands

If you are weighing an EOTECH against an LED red dot, start with our holographic sight vs red dot guide. EOTECH says its HWS creates the reticle with a laser diode and holography instead of an LED, and that its 1 MOA dot stays 1 MOA behind a magnifier. LED dots such as the Holosun 510C and Aimpoint Micro T-2 answer with battery ratings in the tens of thousands of hours and lower weight, while the XPS3 and EXPS3 offer 10 night-vision settings, more than either. Our EOTECH vs Holosun and EOTECH vs Aimpoint comparisons cover the details model by model.

Which EOTECH Should You Buy?

Pick by how you will use the gun. These are the EOTECH models we would start with:

  • Duty or defensive carbine: the EOTECH EXPS3-0. It gives you the standard ring and dot, a QD base at lower 1/3 co-witness, side buttons that work behind a magnifier, and night-vision settings if your needs change.
  • Night vision on a light rifle: the EOTECH XPS3-0, which keeps the night-vision settings in the lighter XPS body. Leave any magnifier off at night, since EOTECH says magnifiers don’t work well under night vision.
  • First EOTECH for a daylight rifle: the EOTECH XPS2-0. It skips the night-vision settings and QD base you may never use, and it comes in the lightest daylight-only body.
  • AA batteries: the EOTECH 518 for a daylight sight that pairs well with a magnifier, or the EOTECH 558 if you also want night vision.
  • Magnified setup: the EOTECH HHS VIII, which pairs an EXPS3-0 with a G33 3x magnifier. If you would rather have one optic that zooms from 1x, choose a Vudu LPVO such as the Vudu 1-6 with the SR3 5.56 BDC reticle for a 5.56 AR.
  • Precision or hunting rifle: the Vudu 5-25 for long range, or the Vudu 3-9 for a short, light hunting scope that offers MOA reticles.
  • Pistol: the EOTECH EFLX with a 6 MOA dot for carry or home defense, or the 3 MOA version for precision work. Confirm that your slide or plate is cut for the DeltaPoint Pro footprint first.

Shop EOTECH Optics

We carry every EOTECH line in this guide. Start with the collection for the optic type you want, or browse the brand page to see the full range in one place.

Want more detail on a specific model? Browse all our EOTECH guides, or use the grouped list below.

All EOTECH Comparisons and Reviews

Here is every EOTECH guide, comparison, and review on our site, grouped by topic.

Holographic Sights

Magnifiers, Risers, and Batteries

Vudu Riflescopes

EFLX and OGL

Comparisons with Other Brands

FAQ

What are the different EOTECH models?

We carry five EOTECH product lines: holographic weapon sights, G-series magnifiers, Vudu riflescopes, EFLX reflex sights, and the OGL C laser. The holographic sights come in three series: the XPS, the EXPS, and the AA-powered 5 Series (512, 518, 552, and 558). In the XPS and EXPS families, a 3 in the name means night-vision settings, and the suffix after the dash names the reticle.

Which EOTECH should I get?

For a daylight carbine, start with the XPS2-0. Choose the EXPS3-0 if you want night-vision settings or plan to add a magnifier, or a Vudu low-power variable optic such as the 1-6 or 1-10 if you want magnification in a single optic.

What is the best EOTECH for an AR-15?

We would start with the EXPS3-0. It has the classic 68 MOA ring and 1 MOA dot, lower 1/3 co-witness with AR-height iron sights, side buttons that work behind a magnifier, and night-vision settings. If you don’t use night vision and want the lightest setup, choose the 9.0 oz XPS2-0, which sits at absolute co-witness.

Which EOTECH sights are night-vision compatible?

The XPS3, EXPS3, 552, and 558 are. Each adds 10 night-vision settings for Gen I through III+ devices to 20 daylight settings, while the hoodless EXPS3 HD has 4 night-vision settings. The XPS2, EXPS2, 512, and 518 have daylight settings only.

Is an EOTECH a red dot sight?

Not technically. EOTECH says its holographic weapon sights create the reticle with a laser diode and holography instead of an LED, though holographic sights and red dots fill the same 1x role on a rifle. The EOTECH EFLX, by contrast, is a reflex sight with a red dot.

Does EOTECH make rifle scopes?

Yes. EOTECH’s Vudu line includes low-power variable optics (LPVOs) that start at 1x (the 1-6, 1-8, and 1-10), the compact 3-9 and 4-12, and the long-range 5-25. We also carry the Vudu X 1-6 and 2-12, the Vudu 3.5-18, and the 8-32.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *